Add code to the generic pci_rom file to access the VGA ROM in PCI space when needed.
Signed-off-by: Simon Glass <[email protected]> --- drivers/pci/pci_auto.c | 28 +++++++++++++++++++++++++++- drivers/pci/pci_rom.c | 7 ++++++- include/pci.h | 9 +++++++++ 3 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 44470fa..61bf6b4 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -11,7 +11,7 @@ */ #include <common.h> - +#include <errno.h> #include <pci.h> #undef DEBUG @@ -191,6 +191,32 @@ void pciauto_setup_device(struct pci_controller *hose, pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); } +int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev) +{ + pci_addr_t bar_value; + pci_size_t bar_size; + u32 bar_response; + u16 cmdstat = 0; + + pci_hose_write_config_dword(hose, dev, PCI_ROM_ADDRESS, -2); + pci_hose_read_config_dword(hose, dev, PCI_ROM_ADDRESS, &bar_response); + if (!bar_response) + return -ENOENT; + + bar_size = -(bar_response & ~1); + DEBUGF("PCI Autoconfig: ROM, size=%#x, ", bar_size); + if (pciauto_region_allocate(hose->pci_mem, bar_size, &bar_value) == 0) { + pci_hose_write_config_dword(hose, dev, PCI_ROM_ADDRESS, + bar_value); + } + DEBUGF("\n"); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat); + cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat); + + return 0; +} + void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index a16e99f..eb76591 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -81,7 +81,12 @@ static int pci_rom_probe(pci_dev_t dev, uint class, #ifdef CONFIG_X86_OPTION_ROM_ADDR rom_address = CONFIG_X86_OPTION_ROM_ADDR; #else - pci_write_config_dword(dev, PCI_ROM_ADDRESS, (u32)PCI_ROM_ADDRESS_MASK); + + if (pciauto_setup_rom(pci_bus_to_hose(PCI_BUS(dev)), dev)) { + debug("Cannot find option ROM\n"); + return -ENOENT; + } + pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_address); if (rom_address == 0x00000000 || rom_address == 0xffffffff) { debug("%s: rom_address=%x\n", __func__, rom_address); diff --git a/include/pci.h b/include/pci.h index 216f448..f135ba8 100644 --- a/include/pci.h +++ b/include/pci.h @@ -701,5 +701,14 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, * */ u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum); +/** + * pciauto_setup_rom() - Set up access to a device ROM + * + * @hose: PCI hose to use + * @dev: PCI device to adjust + * @return 0 if done, -ve on error + */ +int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev); + #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ -- 2.2.0.rc0.207.ga3a616c _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
