[U-Boot] [PATCH v4 4/5] imx:qspi add 4K erase support

[Peng Fan]

Add 4k erase command support for qspi driver. reuse the 64k erase function,
but change the function name from qspi_op_se to qspi_op_erase, since it
supports 64k and 4k erase.

Signed-off-by: Peng Fan <peng....@freescale.com>
---

Changes v4:
 New patch in v4. This patch is to support 4k erase.

 drivers/spi/fsl_qspi.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index e9c45de..d12f420 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -32,12 +32,14 @@
 #define SEQID_CHIP_ERASE       5
 #define SEQID_PP               6
 #define SEQID_RDID             7
+#define SEQID_BE_4K            8
 
 /* QSPI CMD */
 #define QSPI_CMD_PP            0x02    /* Page program (up to 256 bytes) */
 #define QSPI_CMD_RDSR          0x05    /* Read status register */
 #define QSPI_CMD_WREN          0x06    /* Write enable */
 #define QSPI_CMD_FAST_READ     0x0b    /* Read data bytes (high frequency) */
+#define QSPI_CMD_BE_4K         0x20    /* 4K erase */
 #define QSPI_CMD_CHIP_ERASE    0xc7    /* Erase whole flash chip */
 #define QSPI_CMD_SE            0xd8    /* Sector erase (usually 64KiB) */
 #define QSPI_CMD_RDID          0x9f    /* Read JEDEC ID */
@@ -192,6 +194,12 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
        qspi_write32(&regs->lut[lut_base + 2], 0);
        qspi_write32(&regs->lut[lut_base + 3], 0);
 
+       /* SUB SECTOR 4K ERASE */
+       lut_base = SEQID_BE_4K * 4;
+       qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_BE_4K) |
+                    PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+                    PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+
        /* Lock the LUT */
        qspi_write32(&regs->lutkey, LUT_KEY_VALUE);
        qspi_write32(&regs->lckcr, QSPI_LCKCR_LOCK);
@@ -450,7 +458,7 @@ static void qspi_op_rdsr(struct fsl_qspi *qspi, u32 *rxbuf)
        qspi_write32(&regs->mcr, mcr_reg);
 }
 
-static void qspi_op_se(struct fsl_qspi *qspi)
+static void qspi_op_erase(struct fsl_qspi *qspi)
 {
        struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
        u32 mcr_reg;
@@ -469,8 +477,13 @@ static void qspi_op_se(struct fsl_qspi *qspi)
        while (qspi_read32(&regs->sr) & QSPI_SR_BUSY_MASK)
                ;
 
-       qspi_write32(&regs->ipcr,
-               (SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0);
+       if (qspi->cur_seqid == QSPI_CMD_SE) {
+               qspi_write32(&regs->ipcr,
+                            (SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0);
+       } else if (qspi->cur_seqid == QSPI_CMD_BE_4K) {
+               qspi_write32(&regs->ipcr,
+                            (SEQID_BE_4K << QSPI_IPCR_SEQID_SHIFT) | 0);
+       }
        while (qspi_read32(&regs->sr) & QSPI_SR_BUSY_MASK)
                ;
 
@@ -497,9 +510,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 
                if (qspi->cur_seqid == QSPI_CMD_FAST_READ) {
                        qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
-               } else if (qspi->cur_seqid == QSPI_CMD_SE) {
+               } else if ((qspi->cur_seqid == QSPI_CMD_SE) ||
+                          (qspi->cur_seqid == QSPI_CMD_BE_4K)) {
                        qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
-                       qspi_op_se(qspi);
+                       qspi_op_erase(qspi);
                } else if (qspi->cur_seqid == QSPI_CMD_PP) {
                        pp_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
                }
-- 
1.8.4


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot