Add support for USB host mode and USB device mode for the Cyclone V development kit and enable support for UMS (to export SD card as USB mass storage). The UMS is activated via 'ums 0 mmc 0' command, the system must be connected to a host PC via HPS USB port and SD card must be installed for this to work.
Signed-off-by: Marek Vasut <ma...@denx.de> Cc: Chin Liang See <cl...@opensource.altera.com> Cc: Dinh Nguyen <dingu...@opensource.altera.com> Cc: Pavel Machek <pa...@denx.de> Cc: Stefan Roese <s...@denx.de> Cc: Vince Bridgers <vbrid...@opensource.altera.com> --- include/configs/socfpga_cyclone5.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index c3d958c..676144a 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -21,6 +21,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE @@ -33,6 +34,8 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_REGEX /* Enable regular expression support */ @@ -66,6 +69,12 @@ #endif +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Altera" + /* Extra Environment */ #define CONFIG_HOSTNAME socfpga_cyclone5 -- 2.1.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot