This api is wrong array bounds. arch/arm/cpu/armv7/exynos/clock.c: In function 'clock_get_periph_rate': arch/arm/cpu/armv7/exynos/clock.c:265:47: warning: array subscript is above array bounds [-Warray-bounds] struct clk_bit_info *bit_info = &clk_bit_info[peripheral];
And it doesn't use anywhere. It only used to get pwm clock. So it changes from clock_get_periph_rate() to get_pwm_clock. Signed-off-by: Jaehoon Chung <[email protected]> --- arch/arm/cpu/armv7/exynos/clock.c | 173 +++++---------------------------- arch/arm/include/asm/arch-exynos/clk.h | 9 -- 2 files changed, 25 insertions(+), 157 deletions(-) diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index b31c13b..9458428 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -15,49 +15,6 @@ #define PLL_DIV_65535 65535 #define PLL_DIV_65536 65536 -/* * - * This structure is to store the src bit, div bit and prediv bit - * positions of the peripheral clocks of the src and div registers - */ -struct clk_bit_info { - int8_t src_bit; - int8_t div_bit; - int8_t prediv_bit; -}; - -/* src_bit div_bit prediv_bit */ -static struct clk_bit_info clk_bit_info[] = { - {0, 0, -1}, - {4, 4, -1}, - {8, 8, -1}, - {12, 12, -1}, - {0, 0, 8}, - {4, 16, 24}, - {8, 0, 8}, - {12, 16, 24}, - {-1, -1, -1}, - {16, 0, 8}, - {20, 16, 24}, - {24, 0, 8}, - {0, 0, 4}, - {4, 12, 16}, - {-1, -1, -1}, - {-1, -1, -1}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {24, 0, -1}, - {24, 0, -1}, - {24, 0, -1}, - {24, 0, -1}, - {24, 0, -1}, -}; - /* Epll Clock division values to achive different frequency output */ static struct set_epll_con_val exynos5_epll_div[] = { { 192000000, 0, 48, 3, 1, 0 }, @@ -260,110 +217,6 @@ static unsigned long exynos5_get_pll_clk(int pllreg) return fout; } -static unsigned long exynos5_get_periph_rate(int peripheral) -{ - struct clk_bit_info *bit_info = &clk_bit_info[peripheral]; - unsigned long sclk, sub_clk; - unsigned int src, div, sub_div; - struct exynos5_clock *clk = - (struct exynos5_clock *)samsung_get_base_clock(); - - switch (peripheral) { - case PERIPH_ID_UART0: - case PERIPH_ID_UART1: - case PERIPH_ID_UART2: - case PERIPH_ID_UART3: - src = readl(&clk->src_peric0); - div = readl(&clk->div_peric0); - break; - case PERIPH_ID_PWM0: - case PERIPH_ID_PWM1: - case PERIPH_ID_PWM2: - case PERIPH_ID_PWM3: - case PERIPH_ID_PWM4: - src = readl(&clk->src_peric0); - div = readl(&clk->div_peric3); - break; - case PERIPH_ID_I2S0: - src = readl(&clk->src_mau); - div = readl(&clk->div_mau); - case PERIPH_ID_SPI0: - case PERIPH_ID_SPI1: - src = readl(&clk->src_peric1); - div = readl(&clk->div_peric1); - break; - case PERIPH_ID_SPI2: - src = readl(&clk->src_peric1); - div = readl(&clk->div_peric2); - break; - case PERIPH_ID_SPI3: - case PERIPH_ID_SPI4: - src = readl(&clk->sclk_src_isp); - div = readl(&clk->sclk_div_isp); - break; - case PERIPH_ID_SDMMC0: - case PERIPH_ID_SDMMC1: - case PERIPH_ID_SDMMC2: - case PERIPH_ID_SDMMC3: - src = readl(&clk->src_fsys); - div = readl(&clk->div_fsys1); - break; - case PERIPH_ID_I2C0: - case PERIPH_ID_I2C1: - case PERIPH_ID_I2C2: - case PERIPH_ID_I2C3: - case PERIPH_ID_I2C4: - case PERIPH_ID_I2C5: - case PERIPH_ID_I2C6: - case PERIPH_ID_I2C7: - sclk = exynos5_get_pll_clk(MPLL); - sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit) - & 0x7) + 1; - div = ((readl(&clk->div_top0) >> bit_info->prediv_bit) - & 0x7) + 1; - return (sclk / sub_div) / div; - default: - debug("%s: invalid peripheral %d", __func__, peripheral); - return -1; - }; - - src = (src >> bit_info->src_bit) & 0xf; - - switch (src) { - case EXYNOS_SRC_MPLL: - sclk = exynos5_get_pll_clk(MPLL); - break; - case EXYNOS_SRC_EPLL: - sclk = exynos5_get_pll_clk(EPLL); - break; - case EXYNOS_SRC_VPLL: - sclk = exynos5_get_pll_clk(VPLL); - break; - default: - return 0; - } - - /* Ratio clock division for this peripheral */ - sub_div = (div >> bit_info->div_bit) & 0xf; - sub_clk = sclk / (sub_div + 1); - - /* Pre-ratio clock division for SDMMC0 and 2 */ - if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) { - div = (div >> bit_info->prediv_bit) & 0xff; - return sub_clk / (div + 1); - } - - return sub_clk; -} - -unsigned long clock_get_periph_rate(int peripheral) -{ - if (cpu_is_exynos5()) - return exynos5_get_periph_rate(peripheral); - else - return 0; -} - /* exynos5420: return pll clock frequency */ static unsigned long exynos5420_get_pll_clk(int pllreg) { @@ -527,6 +380,30 @@ static unsigned long exynos4x12_get_pwm_clk(void) return pclk; } +/* exynos5: return pwm clock frequency */ +static unsigned long exynos5_get_pwm_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long sclk; + unsigned int ratio, src; + + /* + * CLK_SRC_PERIC0 + * PWM_SEL[27:24] + */ + src = (readl(&clk->src_peric0) >> 24) & 0xf; + sclk = get_pll_clk(src); + + /* + * CLK_DIV_PERIC3 + * PWM_RATIO[3:0] + */ + ratio = readl(&clk->div_peric3) & 0xf; + + return sclk / (ratio + 1); +} + /* exynos5420: return pwm clock frequency */ static unsigned long exynos5420_get_pwm_clk(void) { @@ -1622,7 +1499,7 @@ unsigned long get_pwm_clk(void) if (cpu_is_exynos5()) { if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_pwm_clk(); - return clock_get_periph_rate(PERIPH_ID_PWM0); + return exynos5_get_pwm_clk(); } else { if (proid_is_exynos4412()) return exynos4x12_get_pwm_clk(); diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index db24dc0..a76565b 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -44,13 +44,4 @@ int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq, int set_epll_clk(unsigned long rate); int set_spi_clk(int periph_id, unsigned int rate); -/** - * get the clk frequency of the required peripheral - * - * @param peripheral Peripheral id - * - * @return frequency of the peripheral clk - */ -unsigned long clock_get_periph_rate(int peripheral); - #endif -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
