Dieter,
On Mon, 2009-06-22 at 14:04 +0200, Dieter Kiermaier wrote:
> Hi all,
>
> I've tried the first time booting a self compiled u-boot from git.marvell.com
> U-Boot can be downloaded and started with openocd quite well.
> Boot messages (version is dirty due to a comment in board file):
>
> U-Boot 2009.06-rc2-02207-g14c575a-dirty (Jun 22 2009 - 13:40:45)
> Marvell-Sheevaplug
>
> SoC: Kirkwood 88F6281_A0
> DRAM: 512 MB
> NAND: 512 MiB
> *** Warning - bad CRC or NAND, using default environment
most propably you'll need to save the environment.
>
> In: serial
> Out: serial
> Err: serial
> Net: egiga0
> 88E1116 Initialized on egiga0
> Hit any key to stop autoboot: 0
> Marvell>>
type "save" here and "reset".
>
>
> Environment is broken only with marvell git u-boot. Preflashed u-boot find
> environment is ok.
> Does sheevaplug u-boot from marvell git use other environment settings than
> preflashed u-boot?
>
> Marvell>> printenv
> bootcmd=${x_bootcmd_kernel}; setenv bootargs ${x_bootargs}
> ${x_bootargs_root};
> bootm 0x6400000;
> bootdelay=3
> baudrate=115200
> x_bootargs=console=ttyS0,115200
> mtdparts=orion_nand:512k(uboot),3...@1m(kernel),1...@4m(psm),1...@5m(rootfs)
> rw
> x_bootcmd_kernel=nand read 0x100000 0x6400000 0x300000
> x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2
> stdin=serial
> stdout=serial
> stderr=serial
> ethaddr=00:50:43:e0:b9:d8
> ethact=egiga0
> ipaddr=192.168.2.75
>
> (ipaddr is set after bootup with setenv ipaddr 192.168.2.75)
>
> If I now try to ping another machine in the same network:
> Marvell>> ping 192.168.2.251
> Using egiga0 device
maybe your MAC is missing ? environment ?
>
>
>
> This is all what happens - no response from board, CTRL-C doesn't work.
> Only a hard reset will get the board up again.
>
> Do I have to change something in the default board configuration to
> succesfullly use networking on the sheevaplug?
>
> u-boot is build with following commands:
>
> make ARCH=arm sheevaplug_config
> make
>
> I get no errors during build.
>
> My gcc version is:
> arm-none-linux-gnueabi-gcc (GCC) 4.2.0 20070413 (prerelease)
>
> Any help would be appreciated,
> Dieter
>
>
Regards,
André
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
MATRIX VISION GmbH, Talstra�e 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Gesch�ftsf�hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim
Reich
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
