On 10/12/2014 10:15, Stefan Roese wrote: > This patch adds the new Barco platinum platform. It currently > includes those two boards: > > platinum-titanium > ----------------- > This is the same board as the titanium that is already supported in > mainline U-Boot. But its now moved to this new platform to support > multiple "flavors" of imx6 boards in one directory. Its also moved > to support SPL booting. And with this we use the run-time DDR > configuration of this SPL support. The board is equipped with the > Micron MT41J128M16JT-125 DDR chips. We now can remove the DDR > related registers tuples from the imximage.cfg file. As all this > is done in the SPL at run-time. > > platinum-picon > -------------- > This board is new and based on the MX6DL with 1GiB DDR using the > Micron MT41K256M16HA DDR3 chips. Its also equipped with 2 NAND > chips (each 512MiB). > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Stefano Babic <sba...@denx.de> > Cc: Pieter Ronsijn <pieter.rons...@barco.com> > ---
Applied to -u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
