Hello Albert, First tank you so much for inversting your time for replying.
I put some printf in the code and SPL is hanging in spl_load_image_fat function. I also enable the DEBUG messages here the complete log file : http://pastebin.com/raw.php?i=BwUJXDDb So I suspect that SPL is not allocating enough memory to load u-boot.img but I can't find where this size limit is set and where I can change it. Cheers, Ayoub > 2015-01-19 8:08 GMT+01:00 Albert ARIBAUD <albert.u.b...@aribaud.net>: > > > Hello Ayoub, > > > > On Fri, 16 Jan 2015 15:42:37 +0100, Ayoub Zaki > > <ayoub.z...@googlemail.com> wrote: > > > Hello list, > > > > > > I'm using u-boot-2014.10 and trying to build it with LCD support for the > > > Beaglebone black to include a Boot logo image. > > > It seems that spl hangs while fat loading a 2.8MB sized u-boot.img ! > > > I reduced the the logo header file and rebuild u-boot, that worked for a > > > 1.6MB sized u-boot.img. > > > Is there any size limit for u-boot ? how to increase the memory allocated > > > by spl ? > > > > There should not be a size limit for SPL fat load. > > > > What may happen is that SPL code is overwritten before it exits, or > > U-Boot itself is corrupted after being loaded. > > > > I assume you've seen the SPL banner and not the U-Boot one; that alone > > does not tell us whether SPL or U-Boot did hang. Can you build U-boot > > with debug enabled? If this results in too big an SPL image, then try > > and at least enable debug for the image chainloading parts, so that you > > can see how far SPL code gets run. > > > > > Thanks you. > > > > No problem. > > > > Amicalement, > > -- > > Albert.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot