This series adds support for the Intel Minnowboard Max (called Minnowmax
for short). Along the way a few refactors and additions are made:

- The Intel Firmware Support Package support is moved from queensbay to a
common location
- PCI support for XHCI is added
- A few tweaks are made to the PCI support
- Support for the debug UART (early debug output) is provided
- The microcode tool now also supports reading in header files

This board has been lightly tested. The following seem to work:

- USB2 on the blue port (not USB3), e.g. for keyboard
- Ethernet
- HDMI out and console
- UART
- uSD card
- SPI

SATA is detected but I have not attached a drive to try it. USB3 shows signs
of life but does not detect a USB stick, and crashes when trying to use a
USB Ethernet adaptor.

For SPI some parts cannot be read and others cannot be written. This seems
to be a feature of the Intel hardware configuration. It may be possible to
fix this using the SPI registers but I cannot work out how / lost interest
trying. So far, addresses from 500000 to 700000 can be used.

I have not tried the ICH GPIO driver but it likely needs work before it will
function. I2C is not supported as there is currently no U-Boot driver for
this.

The zboot command can be used to start a bzImage kernel. Verified boot is
supported - use mkimage to sign images as described in this walk-through:
doc/uImage.FIT/beaglebone_vboot.txt

Boot time is grim:
- 1423ms to set up display (Intel FSP)
- 454ms to scan AHCI (when no devices are connected)
- ~1000ms to power up and start cache-as-RAM init (Intel FSP)
     (this is not benchmarked, may be inaccurate)
- ~950ms to set up memory and initial machine configuration (Intel FSP)
     (this is not benchmarked, may be inaccurate)

So it takes over 4 seconds to get to booting a kernel.

Implementing the Memory Reference Code (MRC) cache should improve this
slightly (perhaps a reduction of 500-1000ms). This cache is implemented for
ivybridge so that code needs to be moved into a generic x86 directory and
plumbed into the FSP code. This has not been done in this series. Also the
video and SATA/AHCI can be disabled if preferred.

It is also possible to run as a coreboot payload. See the instructions in
README.x86 for this. In this case video does not work since coreboot does
not pass through the VESA display information.

To support the single-core 1GB variant, changes would need to be made to
arch/x86/cpu/baytrail/fsp_configs.c to select different values for the
memory. The microcode update may need to change also.

This series is available at u-boot-x86 branch minnow-working.


Simon Glass (23):
  x86: Enhance the microcode tool to support header files as input
  pci: Add a function to find a device by class
  x86: pci: Add PCI IDs for Minnowboard Max
  x86: video: Enable video for Minnowboard Max
  usb: pci: Use pci_find_class() to find the device
  usb: pci: Add XHCI driver for PCI
  x86: Add an option to enabling building a ROM file
  x86: Make MMCONF_BASE_ADDRESS common across x86
  x86: video: Allow video ROM execution to fall back to the other method
  x86: bootstage: Add time measurement for vesa start-up
  x86: Move common FSP code into a common location
  x86: Adjust the FSP types slightly
  x86: Make CAR and DRAM FSP code common
  x86: Move common FSP functions into a common file
  x86: Remove unnecessary casts and fix comment typos
  x86: Allow FSP Kconfig settings for all x86
  x86: Define cache line size
  x86: Allow a UART to be set up before the FSP is ready
  x86: spi: Support ValleyView in ICH SPI driver
  scsi: bootstage: Measure time taken to scan the bus
  x86: Enable bootstage features
  x86: Add some documentation on how to port U-Boot on x86
  x86: Add support for Intel Minnowboard Max

 Makefile                                           |    5 +-
 arch/x86/Kconfig                                   |   62 +
 arch/x86/cpu/Makefile                              |    1 +
 arch/x86/cpu/baytrail/Kconfig                      |    9 +
 arch/x86/cpu/baytrail/Makefile                     |   10 +
 arch/x86/cpu/baytrail/early_uart.c                 |   82 +
 arch/x86/cpu/baytrail/fsp_configs.c                |  156 +
 arch/x86/cpu/baytrail/pci.c                        |   47 +
 arch/x86/cpu/baytrail/valleyview.c                 |   37 +
 arch/x86/cpu/ivybridge/gma.c                       |    3 +-
 arch/x86/cpu/queensbay/Kconfig                     |   38 -
 arch/x86/cpu/queensbay/Makefile                    |    4 +-
 arch/x86/cpu/queensbay/fsp_configs.c               |    2 +-
 arch/x86/cpu/queensbay/tnc.c                       |   29 +-
 arch/x86/cpu/queensbay/tnc_pci.c                   |   17 +-
 arch/x86/cpu/queensbay/topcliff.c                  |   32 +-
 arch/x86/dts/Makefile                              |    3 +-
 arch/x86/dts/microcode/m0130673322.dtsi            | 3284 ++++++++++++++++++++
 arch/x86/dts/minnowmax.dts                         |   45 +
 arch/x86/dts/serial.dtsi                           |    2 +-
 arch/x86/include/asm/arch-baytrail/fsp/azalia.h    |   39 +
 arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h   |   95 +
 arch/x86/include/asm/arch-baytrail/gpio.h          |   13 +
 arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h  |    2 -
 arch/x86/include/asm/cache.h                       |    2 +
 .../include/asm/{arch-queensbay => }/fsp/fsp_api.h |    6 +-
 .../asm/{arch-queensbay => }/fsp/fsp_bootmode.h    |    0
 .../include/asm/{arch-queensbay => }/fsp/fsp_ffs.h |    0
 .../include/asm/{arch-queensbay => }/fsp/fsp_fv.h  |    0
 .../include/asm/{arch-queensbay => }/fsp/fsp_hob.h |    0
 .../asm/{arch-queensbay => }/fsp/fsp_infoheader.h  |    0
 .../asm/{arch-queensbay => }/fsp/fsp_platform.h    |    0
 .../asm/{arch-queensbay => }/fsp/fsp_support.h     |    6 +-
 .../asm/{arch-queensbay => }/fsp/fsp_types.h       |    0
 arch/x86/include/asm/u-boot-x86.h                  |   20 +
 arch/x86/lib/Makefile                              |    1 +
 arch/x86/lib/cmd_hob.c                             |    2 +-
 arch/x86/lib/fsp/Makefile                          |   10 +
 .../{cpu/queensbay/tnc_car.S => lib/fsp/fsp_car.S} |    0
 arch/x86/lib/fsp/fsp_common.c                      |   88 +
 .../queensbay/tnc_dram.c => lib/fsp/fsp_dram.c}    |    2 +-
 arch/x86/{cpu/queensbay => lib/fsp}/fsp_support.c  |   20 +-
 board/google/chromebook_link/Kconfig               |    1 -
 board/intel/minnowmax/Kconfig                      |   31 +
 board/intel/minnowmax/MAINTAINERS                  |    6 +
 board/intel/minnowmax/Makefile                     |    7 +
 board/intel/minnowmax/minnowmax.c                  |   32 +
 board/intel/minnowmax/start.S                      |    9 +
 common/cmd_scsi.c                                  |    2 +
 configs/minnowmax_defconfig                        |   13 +
 doc/README.x86                                     |  120 +-
 drivers/pci/pci.c                                  |   38 +
 drivers/pci/pci_rom.c                              |   32 +-
 drivers/spi/ich.c                                  |   56 +-
 drivers/spi/ich.h                                  |   11 +-
 drivers/usb/host/Makefile                          |    1 +
 drivers/usb/host/ehci-pci.c                        |   53 +-
 drivers/usb/host/xhci-pci.c                        |   60 +
 drivers/video/vesa_fb.c                            |    9 +-
 include/bootstage.h                                |    1 +
 include/configs/minnowmax.h                        |   69 +
 include/configs/x86-common.h                       |    3 +
 include/pci.h                                      |    3 +-
 include/pci_ids.h                                  |    5 +
 include/pci_rom.h                                  |   15 +-
 tools/microcode-tool.py                            |   90 +-
 66 files changed, 4589 insertions(+), 252 deletions(-)
 create mode 100644 arch/x86/cpu/baytrail/Kconfig
 create mode 100644 arch/x86/cpu/baytrail/Makefile
 create mode 100644 arch/x86/cpu/baytrail/early_uart.c
 create mode 100644 arch/x86/cpu/baytrail/fsp_configs.c
 create mode 100644 arch/x86/cpu/baytrail/pci.c
 create mode 100644 arch/x86/cpu/baytrail/valleyview.c
 create mode 100644 arch/x86/dts/microcode/m0130673322.dtsi
 create mode 100644 arch/x86/dts/minnowmax.dts
 create mode 100644 arch/x86/include/asm/arch-baytrail/fsp/azalia.h
 create mode 100644 arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
 create mode 100644 arch/x86/include/asm/arch-baytrail/gpio.h
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_api.h (88%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_bootmode.h (100%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_ffs.h (100%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_fv.h (100%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_hob.h (100%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_infoheader.h (100%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_platform.h (100%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_support.h (98%)
 rename arch/x86/include/asm/{arch-queensbay => }/fsp/fsp_types.h (100%)
 create mode 100644 arch/x86/lib/fsp/Makefile
 rename arch/x86/{cpu/queensbay/tnc_car.S => lib/fsp/fsp_car.S} (100%)
 create mode 100644 arch/x86/lib/fsp/fsp_common.c
 rename arch/x86/{cpu/queensbay/tnc_dram.c => lib/fsp/fsp_dram.c} (98%)
 rename arch/x86/{cpu/queensbay => lib/fsp}/fsp_support.c (96%)
 create mode 100644 board/intel/minnowmax/Kconfig
 create mode 100644 board/intel/minnowmax/MAINTAINERS
 create mode 100644 board/intel/minnowmax/Makefile
 create mode 100644 board/intel/minnowmax/minnowmax.c
 create mode 100644 board/intel/minnowmax/start.S
 create mode 100644 configs/minnowmax_defconfig
 create mode 100644 drivers/usb/host/xhci-pci.c
 create mode 100644 include/configs/minnowmax.h

-- 
2.2.0.rc0.207.ga3a616c

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to