Hi Simon and Masahiro, On 02/03/2015 08:32 AM, Masahiro Yamada wrote: > Hi Simon, > > > On Mon, 2 Feb 2015 22:00:25 -0700 > Simon Glass <[email protected]> wrote: > >> Hi, >> >> I have one of boards and would like to get mainline U-Boot booting on it. >> >> I have followed the instructions for creating a BOOT.BIN file comprised of: >> >> - boot.elf >> - .bit file >> - u-boot.elf >> >> and putting it on a a micro-SD card. >> >> This works OK with the diligent master branch from github. I can boot >> normally. >> >> However this is 2013.10. Mainline U-Boot uses device tree so >> presumably the elf file does not work. I expect we need to use >> u-boot-dtb.bin.
I think the best what you can do is simple disable CONFIG_OF_CONTROL
from mainline u-boot and do not use now.
This is what I do in xilinx tree but OF_CONTROL is also working fine
but needs some setup.
>>
>> However since this is not an elf file I'm not sure how to build the
>> image using the 'Create Zynq Boot Image' tool.
>>
>> I don't see any instructions in REAME.zynq about how to create an SD card.
>>
>> Any pointers please?
>>
>
>
> I have a Zynq ZC706 board.
>
> The follwing is what I tried to run u-boot mainline.
>
>
> I hope it will work for Zybo board, too.
Zybo will be just the same.
>
>
> [1] If you are using Xilinx hardware tool (Vivado or ISE)
> you can generate ps7_init.[ch] or ps7_init_gpl.[ch].
>
> Copy the C file and the header into borad/xilinx/zynq directory
>
>
> [2] Build
>
> make zynq_zybo_defconfig && make
>
>
> [3] Download the python script to generate boot.bin
>
> git clone git://github.com/Xilinx/u-boot-xlnx.git
>
> Copy tools/zynq-boot-bin.py to ~/bin or somewhere you like
In future I want to move this script to be the part of mkimage
but it has low priority now.
> [4] Generate boot.bin
>
> zynq-boot-bin.py -o boot.bin -u u-boot/spl/u-boot-spl.bin
>
>
> [5] Copy boot.bin and u-boot-dtb.img to your SD card
>
>
>
>
> Please give it a try.
>
> The problem about the instruction above is FPAG bit file is not loaded.
yes - but if you use xilinx tree I have also added support for loading
bitstream by SPL. I just haven't sent it to mainline yet.
But you can simple load bitstream in full u-boot which is fully supported
in mainline.
> Another way instead of [4] might be:
>
>
> Describe foo.bif as follows
>
> image:
> {
> [bootloader]fsbl.elf
> fpga.bit
> [load=0x04000000,startup=0x04000000]u-boot/u-boot-dtb.bin
> }
>
> and
> $ bootgen -image foo.bif -w on -o boot.bin
>
yes - this should also work.
> I have not working on Zynq these days.
why not? :-)
> I hope Michal can support us.
Simon: Let me know if you need any my help on this.
I have zybo here that I can try it.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
