Hi Akshay,
On 02/03/2015 05:27 PM, Akshay Saraswat wrote:
> Cleaning up soc_get_periph_rate to make the logic easy to
> comprehend.
>
Could you give more detailed description?
> Signed-off-by: Akshay Saraswat <aksha...@samsung.com>
> ---
> Changes since v4:
> - New patch.
>
> arch/arm/cpu/armv7/exynos/clock.c | 76
> +++++++++++++++++----------------------
> 1 file changed, 33 insertions(+), 43 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/exynos/clock.c
> b/arch/arm/cpu/armv7/exynos/clock.c
> index 3884d4b..8724bc7 100644
> --- a/arch/arm/cpu/armv7/exynos/clock.c
> +++ b/arch/arm/cpu/armv7/exynos/clock.c
> @@ -366,8 +366,8 @@ static struct clk_bit_info *get_clk_bit_info(int
> peripheral)
> static unsigned long exynos5_get_periph_rate(int peripheral)
> {
> struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
> - unsigned long sclk, sub_clk = 0;
> - unsigned int src, div, sub_div = 0;
> + unsigned long sclk = 0;
> + unsigned int src = 0, div = 0, sub_div = 0;
> struct exynos5_clock *clk =
> (struct exynos5_clock *)samsung_get_base_clock();
>
> @@ -389,30 +389,30 @@ static unsigned long exynos5_get_periph_rate(int
> peripheral)
> break;
> case PERIPH_ID_I2S0:
> src = readl(&clk->src_mau);
> - div = readl(&clk->div_mau);
> + div = sub_div = readl(&clk->div_mau);
> case PERIPH_ID_SPI0:
> case PERIPH_ID_SPI1:
> src = readl(&clk->src_peric1);
> - div = readl(&clk->div_peric1);
> + div = sub_div = readl(&clk->div_peric1);
> break;
> case PERIPH_ID_SPI2:
> src = readl(&clk->src_peric1);
> - div = readl(&clk->div_peric2);
> + div = sub_div = readl(&clk->div_peric2);
> break;
> case PERIPH_ID_SPI3:
> case PERIPH_ID_SPI4:
> src = readl(&clk->sclk_src_isp);
> - div = readl(&clk->sclk_div_isp);
> + div = sub_div = readl(&clk->sclk_div_isp);
> break;
> case PERIPH_ID_SDMMC0:
> case PERIPH_ID_SDMMC1:
> src = readl(&clk->src_fsys);
> - div = readl(&clk->div_fsys1);
> + div = sub_div = readl(&clk->div_fsys1);
> break;
> case PERIPH_ID_SDMMC2:
> case PERIPH_ID_SDMMC3:
> src = readl(&clk->src_fsys);
> - div = readl(&clk->div_fsys2);
> + div = sub_div = readl(&clk->div_fsys2);
> break;
> case PERIPH_ID_I2C0:
> case PERIPH_ID_I2C1:
> @@ -422,12 +422,10 @@ static unsigned long exynos5_get_periph_rate(int
> peripheral)
> case PERIPH_ID_I2C5:
> case PERIPH_ID_I2C6:
> case PERIPH_ID_I2C7:
> - sclk = exynos5_get_pll_clk(MPLL);
> - sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
> - & bit_info->div_mask) + 1;
> - div = ((readl(&clk->div_top0) >> bit_info->prediv_bit)
> - & bit_info->prediv_mask) + 1;
> - return (sclk / sub_div) / div;
> + src = EXYNOS_SRC_MPLL;
> + div = readl(&clk->div_top0);
> + sub_div = readl(&clk->div_top1);
> + break;
> default:
> debug("%s: invalid peripheral %d", __func__, peripheral);
> return -1;
> @@ -446,29 +444,26 @@ static unsigned long exynos5_get_periph_rate(int
> peripheral)
> case EXYNOS_SRC_VPLL:
> sclk = exynos5_get_pll_clk(VPLL);
> break;
> - default:
> - return 0;
Why remove? I think it's better to use default label and also how about
add debug log?
> }
>
> - /* Ratio clock division for this peripheral */
> - if (bit_info->div_bit >= 0) {
> - sub_div = (div >> bit_info->div_bit) & bit_info->div_mask;
> - sub_clk = sclk / (sub_div + 1);
> - }
> + /* Clock divider ratio for this peripheral */
> + if (bit_info->div_bit >= 0)
> + div = (div >> bit_info->div_bit) & bit_info->div_mask;
>
> - if (bit_info->prediv_bit >= 0) {
> - div = (div >> bit_info->prediv_bit) & bit_info->prediv_mask;
> - return sub_clk / (div + 1);
> - }
> + /* Clock pre-divider ratio for this peripheral */
> + if (bit_info->prediv_bit >= 0)
> + sub_div = (sub_div >> bit_info->prediv_bit)
> + & bit_info->prediv_mask;
>
> - return sub_clk;
> + /* Calculate and return required clock rate */
> + return (sclk / (div + 1)) / (sub_div + 1);
> }
>
> static unsigned long exynos542x_get_periph_rate(int peripheral)
> {
> struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
> - unsigned long sclk, sub_clk = 0;
> - unsigned int src, div, sub_div = 0;
> + unsigned long sclk = 0;
> + unsigned int src = 0, div = 0, sub_div = 0;
> struct exynos5420_clock *clk =
> (struct exynos5420_clock *)samsung_get_base_clock();
>
> @@ -516,10 +511,9 @@ static unsigned long exynos542x_get_periph_rate(int
> peripheral)
> case PERIPH_ID_I2C8:
> case PERIPH_ID_I2C9:
> case PERIPH_ID_I2C10:
> - sclk = exynos542x_get_pll_clk(MPLL);
> - sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
> - & bit_info->div_mask) + 1;
> - return sclk / sub_div;
> + src = EXYNOS542X_SRC_MPLL;
> + div = readl(&clk->div_top1);
> + break;
> default:
> debug("%s: invalid peripheral %d", __func__, peripheral);
> return -1;
> @@ -541,23 +535,19 @@ static unsigned long exynos542x_get_periph_rate(int
> peripheral)
> case EXYNOS542X_SRC_RPLL:
> sclk = exynos542x_get_pll_clk(RPLL);
> break;
> - default:
> - return 0;
Ditto.
> }
>
> - /* Ratio clock division for this peripheral */
> - if (bit_info->div_bit >= 0) {
> + /* Clock divider ratio for this peripheral */
> + if (bit_info->div_bit >= 0)
> div = (div >> bit_info->div_bit) & bit_info->div_mask;
> - sub_clk = sclk / (div + 1);
> - }
>
> - if (bit_info->prediv_bit >= 0) {
> + /* Clock pre-divider ratio for this peripheral */
> + if (bit_info->prediv_bit >= 0)
> sub_div = (sub_div >> bit_info->prediv_bit)
> - & bit_info->prediv_mask;
> - return sub_clk / (sub_div + 1);
> - }
> + & bit_info->prediv_mask;
>
> - return sub_clk;
> + /* Calculate and return required clock rate */
> + return (sclk / (div + 1)) / (sub_div + 1);
> }
>
> unsigned long clock_get_periph_rate(int peripheral)
>
Thanks.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
