Hi Kishon, > Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled > support for DFU. > > Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com> > --- > include/configs/am43xx_evm.h | 61 > +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 > insertions(+), 1 deletion(-) > > diff --git a/include/configs/am43xx_evm.h > b/include/configs/am43xx_evm.h index 4472c3e..3fcd99e 100644 > --- a/include/configs/am43xx_evm.h > +++ b/include/configs/am43xx_evm.h > @@ -108,6 +108,64 @@ > #define CONFIG_OMAP_USB_PHY > #define CONFIG_AM437X_USB2PHY2_HOST > > +/* USB GADGET */ > +#if !defined(CONFIG_SPL_BUILD) || \ > + (defined(CONFIG_SPL_BUILD) && > defined(CONFIG_SPL_USBETH_SUPPORT)) +#define CONFIG_USB_DWC3_PHY_OMAP > +#define CONFIG_USB_DWC3_OMAP > +#define CONFIG_USB_DWC3 > +#define CONFIG_USB_DWC3_GADGET > + > +#define CONFIG_USB_GADGET > +#define CONFIG_USB_ETHER > +#define CONFIG_USB_ETH_RNDIS > +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
I saw somewhere a discussion which forbidden using hardcoded MAC addresses. This particular MAC looks like one for debug/development ;-) > +#define CONFIG_USBDOWNLOAD_GADGET > +#define CONFIG_USB_GADGET_VBUS_DRAW 2 > +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" > +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 > +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 > +#define CONFIG_USB_GADGET_DUALSPEED > +#endif > + > +#ifndef CONFIG_SPL_BUILD > +/* USB Device Firmware Update support */ > +#define CONFIG_DFU_FUNCTION > +#define CONFIG_DFU_RAM > +#define CONFIG_CMD_DFU > + > +#define CONFIG_DFU_MMC > +#define DFU_ALT_INFO_MMC \ > + "dfu_alt_info_mmc=" \ > + "boot part 0 1;" \ > + "rootfs part 0 2;" \ > + "MLO fat 0 1;" \ > + "spl-os-args fat 0 1;" \ > + "spl-os-image fat 0 1;" \ > + "u-boot.img fat 0 1;" \ > + "uEnv.txt fat 0 1\0" > + > +#define DFU_ALT_INFO_EMMC \ > + "dfu_alt_info_emmc=" \ > + "MLO raw 0x100 0x100 mmcpart 0;" \ > + "u-boot.img raw 0x300 0x1000 mmcpart 0\0" > + > +#define CONFIG_DFU_RAM > +#define DFU_ALT_INFO_RAM \ > + "dfu_alt_info_ram=" \ > + "kernel ram 0x80200000 0x4000000;" \ > + "fdt ram 0x80f80000 0x80000;" \ > + "ramdisk ram 0x81000000 0x4000000\0" > + > +#define DFUARGS \ > + "dfu_bufsiz=0x10000\0" \ > + DFU_ALT_INFO_MMC \ > + DFU_ALT_INFO_EMMC \ > + DFU_ALT_INFO_RAM > +#else > +#define DFUARGS > +#endif > + > #ifdef CONFIG_QSPI_BOOT > #define CONFIG_SYS_TEXT_BASE 0x30000000 > #undef CONFIG_ENV_IS_IN_FAT > @@ -238,7 +296,8 @@ > "if test $board_name = AM43__SK; then " \ > "setenv fdtfile am437x-sk-evm.dtb; fi; " \ > "if test $fdtfile = undefined; then " \ > - "echo WARNING: Could not determine device > tree; fi; \0" > + "echo WARNING: Could not determine device > tree; fi; \0" \ > + DFUARGS \ > > #define CONFIG_BOOTCOMMAND \ > "run findfdt; " \ Reviewed-by: Lukasz Majewski <l.majew...@samsung.com> -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
