Hi Simon, On Thu, 2015-02-05 at 21:41 -0700, Simon Glass wrote: > +config SYS_MALLOC_F > + bool "Enable malloc() pool before relocation" > + default 0x400
I'm wondering if default value here should be of type "bool" but not a hex value? Probably this is just a copy paste from the following SYS_MALLOC_F_LEN? > + help > + Before relocation memory is very limited on many platforms. Still, > + we can provide a small malloc() pool if needed. Driver model in > + particular needs this to operate, so that it can allocate the > + initial serial device and any others that are needed. > + > +config SYS_MALLOC_F_LEN > + hex "Size of malloc() pool before relocation" > + depends on SYS_MALLOC_F > + default 0x400 > + help > + Before relocation memory is very limited on many platforms. Still, > + we can provide a small malloc() pool if needed. Driver model in > + particular needs this to operate, so that it can allocate the > + initial serial device and any others that are needed. -Alexey _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
