On Mon, Feb 16, 2015 at 01:54:46PM +0100, Jan Kiszka wrote: > This is based on Thierry Reding's work and uses Ian Campell's > preparatory patches. It comes with full support for CPU_ON/OFF PSCI > services. The algorithm used in this version for turning CPUs on and > off was proposed by Thierry Reding in > http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/210881. It
I can't take full credit for this algorithm, it was originally Peter De Schrijver who proposed it. > consists of first enabling CPU1..3 via the PMC, just to powergate them > again with the help of the Flow Controller. Once the Flow Controller is > in place, we can leave the PMC alone while processing CPU_ON and CPU_OFF > PSCI requests. > > Signed-off-by: Jan Kiszka <[email protected]> > --- > arch/arm/cpu/armv7/Makefile | 1 + > arch/arm/cpu/armv7/tegra-common/Makefile | 1 + > arch/arm/cpu/armv7/tegra-common/psci.S | 101 > ++++++++++++++++++++++++++++++ > arch/arm/cpu/armv7/tegra124/Makefile | 7 +++ > arch/arm/cpu/armv7/tegra124/ap.c | 44 +++++++++++++ > arch/arm/include/asm/arch-tegra124/flow.h | 5 ++ > 6 files changed, 159 insertions(+) > create mode 100644 arch/arm/cpu/armv7/tegra-common/psci.S > create mode 100644 arch/arm/cpu/armv7/tegra124/Makefile > create mode 100644 arch/arm/cpu/armv7/tegra124/ap.c > > diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile > index 409e6f5..616b6cc 100644 > --- a/arch/arm/cpu/armv7/Makefile > +++ b/arch/arm/cpu/armv7/Makefile > @@ -59,6 +59,7 @@ obj-$(CONFIG_SOCFPGA) += socfpga/ > obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ > obj-$(CONFIG_ARCH_SUNXI) += sunxi/ > obj-$(CONFIG_TEGRA20) += tegra20/ > +obj-$(CONFIG_TEGRA124) += tegra124/ > obj-$(CONFIG_U8500) += u8500/ > obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/ > obj-$(CONFIG_VF610) += vf610/ > diff --git a/arch/arm/cpu/armv7/tegra-common/Makefile > b/arch/arm/cpu/armv7/tegra-common/Makefile > index 463c260..89355ca 100644 > --- a/arch/arm/cpu/armv7/tegra-common/Makefile > +++ b/arch/arm/cpu/armv7/tegra-common/Makefile > @@ -7,4 +7,5 @@ > # SPDX-License-Identifier: GPL-2.0+ > # > > +obj-$(CONFIG_ARMV7_PSCI) += psci.o > obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o > diff --git a/arch/arm/cpu/armv7/tegra-common/psci.S > b/arch/arm/cpu/armv7/tegra-common/psci.S > new file mode 100644 > index 0000000..b7501fb > --- /dev/null > +++ b/arch/arm/cpu/armv7/tegra-common/psci.S > @@ -0,0 +1,101 @@ > +/* > + * Copyright (C) 2014, NVIDIA > + * Copyright (C) 2015, Siemens AG > + * > + * Authors: > + * Thierry Reding <[email protected]> > + * Jan Kiszka <[email protected]> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <linux/linkage.h> > +#include <asm/psci.h> > + > + .pushsection ._secure.text, "ax" > + .arch_extension sec > + > +#define TEGRA_SB_CSR_0 0x6000c200 > +#define NS_RST_VEC_WR_DIS (1 << 1) > + > +#define TEGRA_RESET_EXCEPTION_VECTOR 0x6000f100 > + > +#define TEGRA_FLOW_CTRL_BASE 0x60007000 > +#define FLOW_CTRL_CPU_CSR 0x08 > +#define CSR_ENABLE (1 << 0) > +#define CSR_IMMEDIATE_WAKE (1 << 3) > +#define CSR_WAIT_WFI_SHIFT 8 > +#define FLOW_CTRL_CPU1_CSR 0x18 > + > +@ converts CPU ID into FLOW_CTRL_CPUn_CSR offset > +.macro get_csr_reg cpu, ofs, tmp > + cmp \cpu, #0 @ CPU0? > + lsl \tmp, \cpu, #3 @ multiple by 8 (register offset CPU1-3) > + moveq \ofs, #FLOW_CTRL_CPU_CSR > + addne \ofs, \tmp, #FLOW_CTRL_CPU1_CSR - 8 > +.endm > + > +ENTRY(psci_arch_init) > + mov r6, lr > + > + mrc p15, 0, r5, c1, c1, 0 @ Read SCR > + bic r5, r5, #1 @ Secure mode > + mcr p15, 0, r5, c1, c1, 0 @ Write SCR > + isb > + > + @ lock reset vector > + ldr r4, =TEGRA_SB_CSR_0 > + ldr r5, [r4] > + orr r5, r5, #NS_RST_VEC_WR_DIS > + str r5, [r4] > + > + mrc p15, 0, r4, c0, c0, 5 @ MPIDR > + and r4, r4, #7 @ number of CPUs in cluster The comment here is somewhat confusing. Should this perhaps be something like "index of CPU in cluster"? > + bl psci_get_cpu_stack_top > + mov sp, r5 > + > + bx r6 > +ENDPROC(psci_arch_init) > + > +ENTRY(psci_cpu_off) > + bl psci_cpu_off_common > + > + mrc p15, 0, r1, c0, c0, 5 @ MPIDR > + and r1, r1, #7 @ number of CPUs in cluster Same here. > diff --git a/arch/arm/cpu/armv7/tegra124/ap.c > b/arch/arm/cpu/armv7/tegra124/ap.c [...] I think this code should work on Tegra114 as well. I'll go try them out and confirm that. If it works out it would be nice to share this across the two generations. It might even work on Tegra30, too. > @@ -0,0 +1,44 @@ > +/* > + * (C) Copyright 2015, Siemens AG > + * Author: Jan Kiszka <[email protected]> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <common.h> > +#include <asm/io.h> > +#include <asm/arch/flow.h> > +#include <asm/arch/powergate.h> > +#include <asm/arch-tegra/ap.h> > +#include <asm/arch-tegra/pmc.h> > + > +static void park_cpu(void) > +{ > + while (1) > + asm volatile("wfi"); > +} > + > +void ap_pm_init(void) > +{ > + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; > + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; > + > + writel((u32)park_cpu, EXCEP_VECTOR_CPU_RESET_VECTOR); > + > + tegra_powergate_power_on(TEGRA_POWERGATE_CPU1); > + tegra_powergate_power_on(TEGRA_POWERGATE_CPU2); > + tegra_powergate_power_on(TEGRA_POWERGATE_CPU3); > + > + writel((2 << CSR_WAIT_WFI_SHIFT) | CSR_ENABLE, &flow->cpu1_csr); > + writel((4 << CSR_WAIT_WFI_SHIFT) | CSR_ENABLE, &flow->cpu2_csr); > + writel((8 << CSR_WAIT_WFI_SHIFT) | CSR_ENABLE, &flow->cpu3_csr); > + > + writel(EVENT_MODE_STOP, &flow->halt_cpu1_events); > + writel(EVENT_MODE_STOP, &flow->halt_cpu2_events); > + writel(EVENT_MODE_STOP, &flow->halt_cpu3_events); > + > + while (readl(&pmc->pmc_pwrgate_status) & ((1 << TEGRA_POWERGATE_CPU1) | > + (1 << TEGRA_POWERGATE_CPU2) | > + (1 << TEGRA_POWERGATE_CPU3))) > + /* wait */; Perhaps the wait should be folded into tegra_powergate_power_on()? I'm not sure it's allowed to queue changes for more than a single partition at a time. Thierry
pgpnoRu6niNaU.pgp
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
