In our use cases, it would not be so troublesome to use the bus number given by the binding order.
Signed-off-by: Masahiro Yamada <[email protected]> --- arch/arm/dts/uniphier-ph1-ld4-ref.dts | 4 ---- arch/arm/dts/uniphier-ph1-pro4-ref.dts | 6 ------ arch/arm/dts/uniphier-ph1-sld8-ref.dts | 4 ---- configs/ph1_ld4_defconfig | 1 + configs/ph1_pro4_defconfig | 1 + configs/ph1_sld8_defconfig | 1 + 6 files changed, 3 insertions(+), 14 deletions(-) diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index d479be1..9c24bbf 100644 --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -30,10 +30,6 @@ serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; }; }; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index 685b5a6..c76a837 100644 --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -30,12 +30,6 @@ serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c5 = &i2c5; - i2c6 = &i2c6; }; }; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index 0cb9c47..3399ed2 100644 --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -30,10 +30,6 @@ serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; }; }; diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 52bbe9b..4d06a2b 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -36,6 +36,7 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_DM_SERIAL=y CONFIG_UNIPHIER_SERIAL=y CONFIG_DM_I2C=y +# CONFIG_DM_I2C_SEQ_ALIAS is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 1517f3c..e2a7d36 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -36,6 +36,7 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_DM_SERIAL=y CONFIG_UNIPHIER_SERIAL=y CONFIG_DM_I2C=y +# CONFIG_DM_I2C_SEQ_ALIAS is not set CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index e3ce5cc..394ce71 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -36,6 +36,7 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_DM_SERIAL=y CONFIG_UNIPHIER_SERIAL=y CONFIG_DM_I2C=y +# CONFIG_DM_I2C_SEQ_ALIAS is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
