Hi,
On 02/24/2015 03:53 AM, Siarhei Siamashka wrote:
On Mon, 23 Feb 2015 20:44:10 +0000
Adam Sampson <[email protected]> wrote:
The tpr3 (timing skew) parameter is used in all supported versions of
the sunxi DRAM controller, but it was only enabled for sun4i in
47e3501a76894f4ba08bc61f33774bd5d39ff464.
Signed-off-by: Adam Sampson <[email protected]>
---
board/sunxi/dram_sun5i_auto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
index e52d54c..660b18e 100644
--- a/board/sunxi/dram_sun5i_auto.c
+++ b/board/sunxi/dram_sun5i_auto.c
@@ -24,7 +24,7 @@ static struct dram_para dram_para = {
# include "dram_timings_sun4i.h"
.active_windowing = 1,
#endif
- .tpr3 = 0,
+ .tpr3 = CONFIG_DRAM_TPR3,
.tpr4 = 0,
.tpr5 = 0,
.emr1 = CONFIG_DRAM_EMR1,
Oops. Thanks for spotting this.
Acked-by: Siarhei Siamashka <[email protected]>
Thanks!
Queued up in u-boot-sunxi/next for merging, with Siarhei's ack,
Regards,
Hans
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
