Update to existing recommendation for L2ACTLR configuration to prevent system instability and optimize performance.
These apply to both OMAP5 and DRA7. Reported-by: Vivek Chengalvala <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> --- arch/arm/cpu/armv7/omap5/hwinit.c | 16 ++++++++++++++++ arch/arm/include/asm/arch-omap5/sys_proto.h | 3 +++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index a8a474a88be9..632df4f0bfae 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -304,6 +304,21 @@ void config_data_eye_leveling_samples(u32 emif_base) (*ctrl)->control_emif2_sdram_config_ext); } +void init_cpu_configuration(void) +{ + u32 l2actlr; + + asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r"(l2actlr)); + /* + * L2ACTLR: Ensure to enable the following: + * 3: Disable clean/evict push to external + * 4: Disable WriteUnique and WriteLineUnique transactions from master + * 8: Disable DVM/CMO message broadcast + */ + l2actlr |= 0x118; + omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2actlr); +} + void init_omap_revision(void) { /* @@ -342,6 +357,7 @@ void init_omap_revision(void) default: *omap_si_rev = OMAP5430_SILICON_ID_INVALID; } + init_cpu_configuration(); } void reset_cpu(ulong ignored) diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 0a7a52d138df..e2e186859373 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -67,4 +67,7 @@ static inline u32 usec_to_32k(u32 usec) { return div_round_up(32768 * usec, 1000000); } + +#define OMAP5_SERVICE_L2ACTLR_SET 0x104 + #endif -- 1.7.9.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
