Hi Dave, On Thu, Feb 26, 2015 at 3:19 PM, DaveKucharczyk <david.kucharc...@gmail.com> wrote: > Benoît Thébaudeau-2 wrote >> Also, check the CONFIG_SYS_TEXT_BASE of your board. From your log, I'm >> wondering if it's not set too high, resulting in an overlap of the >> pre- and post-relocation addresses occupied by your binary in the >> 256-MiB case. > > BINGO!!! Good catch Benoît, thank you. I changed it from 9FF80000 to > 9F000000 and now it boots. > > Looking at the original log...it relocated 90KB above text base. Not quite > enough room... > -------- > U-Boot code: 9FF80000 -> 9FFA6840 BSS: -> 9FFD944C > . > Relocating to 9ff96000, new gd at 9fe55ed0, sp at 9fe55eb0 > ------
You're welcome. > On a side note, how involved would it be to convert to 2015.01? I've already > ported 3 boards for 2014.07. Will everything I've done work perfectly fine > with 2015.01? You will probably have to make a few adjustments, but that should not be too heavy. There have been many changes in the infrastructure of U-Boot lately, mainly revolving around the integration of Kconfig, Kbuild and the driver model. At worst, you should have to upgrade your config / make / maintainers files, and maybe adjust your code for a few changes in the driver APIs. To have an idea: http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=history;f=board/freescale/mx51evk;hpb=refs/tags/v2014.07;hb=refs/tags/v2015.01 Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot