Hello, On 18 February 2015 at 06:24, Michal Suchanek <[email protected]> wrote: > On 18 February 2015 at 03:27, Simon Glass <[email protected]> wrote: >> Hi Michal, >> >> On 16 February 2015 at 04:41, Michal Suchanek <[email protected]> wrote: >>> On 13 February 2015 at 05:51, Simon Glass <[email protected]> wrote: >>>> Hi Michal, >>>> >>>> On 11 February 2015 at 10:16, Michal Suchanek <[email protected]> wrote: >>>>> >>>>> Hello, >>>>> >>>>> I changed the SYS_START to work around the bug in the manufacturer >>>>> firmware, applied snow_defconfig, built u-boot.bin, packed it into >>>>> kernel uimage, signed it, copied it to a kernel partition, bumped >>>>> priority of the partition, and rebooted. >>>>> >>>> >>>> Do you mean u-boot-dtb.bin? If not you won't get a device tree and it >>>> won't work. >>> >>> No, u-boot.bin. With u-boot-dtb.bin I get a snow # prompt on the >>> built-in LCD, and working keyboard. >> >> OK sounds like it is working, good! I wonder if we should have a page >> on elinux.org?
It is working to some extent. I managed to load kernel from the emmc which works fine but the kernel cannot read the emmc after it boots because it does not properly parse the partitioning scheme. This should be trivially fixable in the kernel and might actually work if I updated my sources but rebasing the extra patches required for Snow is not automatically handled. On the other hand, the linux kernel has no problem with the SDXC card in the SD slot and can read it just fine. Unfortunately, u-boot complains about EFI partition errors and won't load anything from the card. I tried two different GPT partitioning tools on the card and both say that the partition layout is fine and that I have the default 128 entries. How can I tell why u-boot does not like my GPT label? Thanks Michal _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
