On 08:09 Tue 30 Jun , Daniel Gorsulowski wrote: > To enable CAN init, CONFIG_CAN has to be defined in the board config file > and at91_can_hw_init() has to be called in the board specific code. > > CAN is available on AT91SAM9263 and AT91CAP9 SoC. > > Signed-off-by: Daniel Gorsulowski <[email protected]> > --- > cpu/arm926ejs/at91/at91cap9_devices.c | 15 +++++++++++++++ > cpu/arm926ejs/at91/at91sam9263_devices.c | 15 +++++++++++++++ > include/asm-arm/arch-at91/at91_common.h | 1 + > 3 files changed, 31 insertions(+), 0 deletions(-) Applied to u-boot-arm
Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
