Dear all,
I am quite new to uboot and I am experimenting it on a iMX28 EVK board (rev. D). I am building the uboot (2014.07 version) by means of buildroot (version 2014.08) and I am using the standard mxs-bootlet package provided by buildroot. When trying to boot the EVK, it hangs after DRAM initialization as shown below. The EVK itself seems ok since barebox (also built with buildroot) can successfully starts up. I have read that such problem has been seem on iMX28 EVK rev A but I am not aware of any DDR related issue on the iMX28 EVK rev D board. Would anyone have already seen such issue and know if some patches are required in uboot? Thanks in advance for any help or suggestion Best regards Adrien Uboot log: PowerPrep start initialize power... Battery Voltage = 2.21V No battery or bad battery detected!!!.Disabling battery voltage measurements./r/nMar 13 201515:40:12 FRAC 0x92925552 memory type is DDR2 Wait for ddr ready 1power 0x00820616 Frac 0x92925552 start change cpu freq hbus 0x00000003 cpu 0x00010001 start test memory accress ddr2 0x40000000 finish simple test U-Boot 2014.07 (Mar 13 2015 - 15:40:15) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: NAND 8GiB 3,3V 8-bit SPI: ready DRAM: _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot