Hi Anish, Thanks for pointing that out. I ran menuconfig and that fixed the compilation issue however, now I'm getting this error when I try to run it:
spl_load_image_fat_os: error reading image args, err - -1 I guess I'll fool around with menuconfig see if there is something that should be enabled and isn't. (maybe you have a suggestion on this?) Anyway, I'll post updated defconfigs when I figure it out. Hopefully this is just a config issue. Thanks, Gilles . > On Mar 14, 2015, at 10:55 , Anish Khurana <anish.khurana130...@gmail.com> > wrote: > > Hi Gilles, > > This u-boot version is having lot of changes , they have enabled > Kconfig similar to Kernel and having GUI support ( make menuconfig) . > so if you are gettting error as you mentioned , try to add Device > model configurations and SYS malloc() as : > > Steps 1 make <birdland_bav335x config> > Step 2 make menuconfig > Step 3 Device driver -> Enable driver model, enable Driver model for serial) > Step 4 malloc() pool , General setup --> Enable malloc() pool. > > Please try this , I think it will work. > > Thanks, > Anish > > > On Sat, Mar 14, 2015 at 10:36 AM, Gilles <gil...@gigadevices.com> wrote: >> Folks, >> >> I posted a patch to add support for bav335x boards (a322aad99de4). The patch >> was tested against v2015.04-rc1 and worked perfectly but somehow, something >> was introduced since then which breaks the board support. >> >> There are two main errors I need to fix before posting another patch but >> need help with the second error. >> >> The first error is easy. Compilation throws: >> #error "Please define NS16550 registers size." >> which I can simply fix by defining CONFIG_SYS_NS16550_REG_SIZE in >> include/configs/bav335x.h >> ((( Altough I am stil puzzled as to why this was defined as -4 (where?) on >> v2015.04-rc1 ))) >> >> After adding the define, everything compiles up to failing on the final link >> with: >> >> drivers/serial/built-in.o: In function `get_current': >> /home/gilles/bbdev/u-boot/drivers/serial/serial.c:389: undefined reference >> to `default_serial_console' >> drivers/serial/built-in.o: In function `serial_initialize': >> >> Can anyone please explain what changed between 2015.04-rc1 and 2015.04-rc2 >> which could cause such a behavior? I have spent the last couple hours >> re-basing a branch to see where it breaks as to maybe get a clue on what >> changed but no luck so far. Any tips would be appreciated. >> >> Thanks, >> Gilles >> . >> >> >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot