On Wed, Mar 18, 2015 at 3:53 PM, <and...@inversepath.com> wrote: > From: Andrej Rosano <and...@inversepath.com> > > Add support for Inverse Path USB armory board, an open source > flash-drive sized computer based on Freescale i.MX53 SoC. > > http://inversepath.com/usbarmory > > Signed-off-by: Andrej Rosano <and...@inversepath.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Chris Kuethe <chris.kue...@gmail.com> > Cc: Fabio Estevam <feste...@gmail.com>
Tested-by: Chris Kuethe <chris.kue...@gmail.com> --- I don't have the default kernel image in place; the board boots when I do point it at a valid image. U-Boot 2015.04-rc4-dirty (Mar 18 2015 - 16:12:11) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: Inverse Path USB armory MkI I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 1 0 ** File not found /boot/uImage ** 16610 bytes read in 70 ms (231.4 KiB/s) Wrong Image Format for bootm command ERROR: can't get kernel image! => reset resetting ... U-Boot 2015.04-rc4-dirty (Mar 18 2015 - 16:12:11) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Board: Inverse Path USB armory MkI I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 1 0 ** File not found /boot/uImage ** 16610 bytes read in 69 ms (234.4 KiB/s) Wrong Image Format for bootm command ERROR: can't get kernel image! => -- GDB has a 'break' feature; why doesn't it have 'fix' too? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
