From: Hannes Petermaier <hannes.peterma...@br-automation.com>
since we have possibility to write out on lcd whats going on, we don't need
the gpio blink functionality anymore.
Signed-off-by: Hannes Petermaier <hannes.peterma...@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5...@oevsv.at>
---
board/BuR/common/bur_common.h | 1 -
board/BuR/common/common.c | 14 --------------
2 files changed, 15 deletions(-)
diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h
index 3061e4c..e4896fb 100644
--- a/board/BuR/common/bur_common.h
+++ b/board/BuR/common/bur_common.h
@@ -16,7 +16,6 @@
int load_lcdtiming(struct am335x_lcdpanel *panel);
void br_summaryscreen(void);
-void blink(u32 blinks, u32 intervall, u32 pin);
void pmicsetup(u32 mpupll);
void enable_uart0_pin_mux(void);
void enable_i2c_pin_mux(void);
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 91834eb..ccaa9c6 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -441,20 +441,6 @@ void lcd_enable(void)
#error "LCD-support with a suitable FB-Driver is mandatory !"
#endif /* CONFIG_LCD */
-void blink(u32 blinks, u32 intervall, u32 pin)
-{
- gpio_direction_output(pin, 0);
- int val = 0;
-
- do {
- val ^= 0x01;
- gpio_set_value(pin, val);
- mdelay(intervall);
- } while (blinks--);
-
- gpio_set_value(pin, 0);
-}
-
#ifdef CONFIG_SPL_BUILD
void pmicsetup(u32 mpupll)
{
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
