> Gesendet: Donnerstag, 19. März 2015 um 08:11 Uhr > Von: "Igor Grinberg" <grinb...@compulab.co.il> > An: "Peter Kuemmel" <syntheti...@gmx.net>, u-boot@lists.denx.de > Cc: "Nikita Kiryanov" <nik...@compulab.co.il> > Betreff: Re: [U-Boot] v2015.04-rc4: broken for custom TI-based board > > Hi Peter, > > On 03/18/15 20:07, Peter Kuemmel wrote: > > I have a custom board which boots with a patched > > cm_t35 configuration based on the v2015.01 release. > > > > When I update to v2015.04-rc4 the system reboots > > after the x-loader has read u-boot from MMC and > > started it. > > IIUC, we have a working v2015.01 and non working v2015.04-rc4? > > > > > Does someone has an idea which change could be > > responsible for this? > > Not sure. May be you can run a quick git bisect? > v2015.01 .. v2015.04-rc4 shouldn't be too much.
After bisecting it figures out that the default configuration does not work: I have to disable "Enable Driver Model for serial drivers" But still have to enable the "Driver Model", even without any other drivers are selected. (Seems I have to read some documentation about the driver model). Thanks, Peter > > > -- > Regards, > Igor. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot