Some MMC cards come to ready state quite quickly, so that the respective flag appears to be set in mmc_send_op_cond already. In this case trying to continue polling the card with CMD1 in mmc_complete_op_cond is incorrect and may lead to unpredictable results. So check the flag before polling and skip it appropriately.
Signed-off-by: Andrew Gabbasov <andrew_gabba...@mentor.com> --- drivers/mmc/mmc.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index d073d79..42af47c 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -403,15 +403,17 @@ static int mmc_complete_op_cond(struct mmc *mmc) int err; mmc->op_cond_pending = 0; - start = get_timer(0); - do { - err = mmc_send_op_cond_iter(mmc, 1); - if (err) - return err; - if (get_timer(start) > timeout) - return UNUSABLE_ERR; - udelay(100); - } while (!(mmc->ocr & OCR_BUSY)); + if (!(mmc->ocr & OCR_BUSY)) { + start = get_timer(0); + do { + err = mmc_send_op_cond_iter(mmc, 1); + if (err) + return err; + if (get_timer(start) > timeout) + return UNUSABLE_ERR; + udelay(100); + } while (!(mmc->ocr & OCR_BUSY)); + } if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ cmd.cmdidx = MMC_CMD_SPI_READ_OCR; -- 2.1.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot