Hi David, On Fri, 20 Mar 2015 08:27:23 +0100 David Dueck <[email protected]> wrote:
Can you add a short commit message ? Apart from that, you have my Reviewed-by: Boris Brezillon <[email protected]> > Signed-off-by: David Dueck <[email protected]> > CC: Boris BREZILLON <[email protected]> > CC: Josh Wu <[email protected]> > CC: Andreas Bießmann <[email protected]> > CC: Scott Wood <[email protected]> > --- > drivers/mtd/nand/atmel_nand.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c > index b16e3aa..a2016e7 100644 > --- a/drivers/mtd/nand/atmel_nand.c > +++ b/drivers/mtd/nand/atmel_nand.c > @@ -1456,6 +1456,9 @@ int board_nand_init(struct nand_chip *nand) > nand->dev_ready = at91_nand_wait_ready; > #endif > nand->chip_delay = 20; > +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT > + nand->bbt_options |= NAND_BBT_USE_FLASH; > +#endif > > #ifdef CONFIG_ATMEL_NAND_HWECC > #ifdef CONFIG_ATMEL_NAND_HW_PMECC > @@ -1522,6 +1525,9 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) > nand->dev_ready = at91_nand_ready; > #endif > nand->chip_delay = 75; > +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT > + nand->bbt_options |= NAND_BBT_USE_FLASH; > +#endif > > ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL); > if (ret) -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
