Hi,
On 23-03-15 17:28, Hans de Goede wrote:
vbus-usable does not get set if power is provided through the power barrel
connector, even if external 5v is also present on the otg connector.
vbus-available correctly always reflects if there is 5v present on the otg
connector.
Except that it also gets set when there is a usb-host cable with a device
attached plugged in, so this is going to need some more thinking, I'll
send a new patch when I've something which does not break using the port
in host mode.
Regards,
Hans
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
