Hi Tom,
On 9 March 2015 at 19:16, Simon Glass <[email protected]> wrote:
> Let's try this:
>
> Reported-by: Stephen Warren <[email protected]>
>
>
> On 9 March 2015 at 19:12, Simon Glass <[email protected]> wrote:
>> Requesting a GPIO without a name is not supposed anymore. This causes the
>> request to fail. Add a name so that the serial console works on seaboard.
>>
>> Signed-off-by: Simon Glass <[email protected]>
Can you please apply this fix?
>> ---
>>
>> board/nvidia/seaboard/seaboard.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/board/nvidia/seaboard/seaboard.c
>> b/board/nvidia/seaboard/seaboard.c
>> index 25480e4..2d07001 100644
>> --- a/board/nvidia/seaboard/seaboard.c
>> +++ b/board/nvidia/seaboard/seaboard.c
>> @@ -20,7 +20,7 @@
>> void gpio_early_init_uart(void)
>> {
>> /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works
>> */
>> - gpio_request(GPIO_PI3, NULL);
>> + gpio_request(GPIO_PI3, "uart_en");
>> gpio_direction_output(GPIO_PI3, 0);
>> }
>> #endif
>> --
>> 2.2.0.rc0.207.ga3a616c
>>
Regards,
Simon
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
