Hi Bin, On 20 April 2015 at 23:05, Bin Meng <[email protected]> wrote: > Not like other x86 chipset, there is no EEPROM for the ethernet > controller on the Intel Quark SoC to retreive the mac address > after power up. With pre-defined mac addresses, U-Boot boots up > and will not show "Error: dwmac.90006000 address not set" message. > > Signed-off-by: Bin Meng <[email protected]> > --- > > include/configs/galileo.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/include/configs/galileo.h b/include/configs/galileo.h > index d4d0eb3..961d087 100644 > --- a/include/configs/galileo.h > +++ b/include/configs/galileo.h > @@ -62,6 +62,8 @@ > #define CONFIG_DESIGNWARE_ETH > #define CONFIG_DW_ALTDESCRIPTOR > #define CONFIG_PHYLIB > +#define CONFIG_ETHADDR 00:02:b3:00:00:00 > +#define CONFIG_ETH1ADDR 00:02:b3:00:00:01
I recall this coming up before with another board - we are not supposed to set a default MAC address since it may create inexplicable conflicts on the network if an org two boards on the same network one day. Can you just set an environment variable? > > /* Environment configuration */ > #define CONFIG_ENV_SECT_SIZE 0x1000 > -- > 1.8.2.1 > Regards, Simon _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
