All sunxi boards now use the device-model, so remove the non device-model
code.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 arch/arm/cpu/armv7/sunxi/board.c | 12 -------
 drivers/net/sunxi_emac.c         | 69 ----------------------------------------
 include/netdev.h                 |  1 -
 3 files changed, 82 deletions(-)

diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index cde13ef..f0d87a8 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -12,10 +12,6 @@
 
 #include <common.h>
 #include <i2c.h>
-#ifndef CONFIG_DM_ETH
-#include <netdev.h>
-#endif
-#include <miiphy.h>
 #include <serial.h>
 #ifdef CONFIG_SPL_BUILD
 #include <spl.h>
@@ -226,14 +222,6 @@ int cpu_eth_init(bd_t *bis)
        mdelay(200);
 #endif
 
-#if defined CONFIG_SUNXI_EMAC && !defined CONFIG_DM_ETH
-       rc = sunxi_emac_initialize(bis);
-       if (rc < 0) {
-               printf("sunxi: failed to initialize emac\n");
-               return rc;
-       }
-#endif
-
 #ifdef CONFIG_SUNXI_GMAC
        rc = sunxi_gmac_initialize(bis);
        if (rc < 0) {
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index a9efe11..5d4faf4 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -513,74 +513,6 @@ static void sunxi_emac_board_setup(struct emac_eth_dev 
*priv)
        clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
 }
 
-#ifndef CONFIG_DM_ETH
-static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bis)
-{
-       return _sunxi_emac_eth_init(dev->priv, dev->enetaddr);
-}
-
-static void sunxi_emac_eth_halt(struct eth_device *dev)
-{
-       /* Nothing to do here */
-}
-
-static int sunxi_emac_eth_recv(struct eth_device *dev)
-{
-       int rx_len;
-
-       rx_len = _sunxi_emac_eth_recv(dev->priv, net_rx_packets[0]);
-       if (rx_len <= 0)
-               return 0;
-
-       /* Pass to upper layer */
-       net_process_received_packet(net_rx_packets[0], rx_len);
-
-       return rx_len;
-}
-
-static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int 
length)
-{
-       return _sunxi_emac_eth_send(dev->priv, packet, length);
-}
-
-int sunxi_emac_initialize(void)
-{
-       struct emac_regs *regs =
-               (struct emac_regs *)SUNXI_EMAC_BASE;
-       struct eth_device *dev;
-       struct emac_eth_dev *priv;
-
-       dev = malloc(sizeof(*dev));
-       if (dev == NULL)
-               return -ENOMEM;
-
-       priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
-       if (!priv) {
-               free(dev);
-               return -ENOMEM;
-       }
-
-       memset(dev, 0, sizeof(*dev));
-       memset(priv, 0, sizeof(struct emac_eth_dev));
-
-       priv->regs = regs;
-       dev->iobase = (int)regs;
-       dev->priv = priv;
-       dev->init = sunxi_emac_eth_init;
-       dev->halt = sunxi_emac_eth_halt;
-       dev->send = sunxi_emac_eth_send;
-       dev->recv = sunxi_emac_eth_recv;
-       strcpy(dev->name, "emac");
-
-       sunxi_emac_board_setup(priv);
-
-       eth_register(dev);
-
-       return sunxi_emac_init_phy(priv, dev);
-}
-#endif
-
-#ifdef CONFIG_DM_ETH
 static int sunxi_emac_eth_start(struct udevice *dev)
 {
        struct eth_pdata *pdata = dev_get_platdata(dev);
@@ -653,4 +585,3 @@ U_BOOT_DRIVER(eth_sunxi_emac) = {
        .priv_auto_alloc_size = sizeof(struct emac_eth_dev),
        .platdata_auto_alloc_size = sizeof(struct eth_pdata),
 };
-#endif
diff --git a/include/netdev.h b/include/netdev.h
index e6bdfdf..662d173 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -80,7 +80,6 @@ int sh_eth_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
 int smc91111_initialize(u8 dev_num, int base_addr);
 int smc911x_initialize(u8 dev_num, int base_addr);
-int sunxi_emac_initialize(bd_t *bis);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
-- 
2.3.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to