Every pin can be configured now from the device tree. A dt-bindings
has been added to describe the different property available.
Signed-off-by: Gabriel Huau <cont...@huau-gabriel.fr>
---
Changes for v2:
- Clean commit message
- Rename compatible string 'ich6' to 'x86'
- Fix coding style
- Create a dt-bindinds documentation
- Move x86-gpio defines to a specific header
- Reorder the functions to avoid the need for forward declarations
- Rename double underscore functions to only one
- Create a specific function to configure one pin
- Use a define to prevent build/support issues with other x86 CPU that
doesn't have a IOBASE.
arch/x86/dts/minnowmax.dts | 21 ++
arch/x86/include/asm/arch-baytrail/gpio.h | 1 +
arch/x86/include/asm/gpio.h | 1 +
.../gpio/intel,x86-pinctrl.txt | 31 +++
drivers/gpio/intel_ich6_gpio.c | 234 ++++++++++++++++++---
include/dt-bindings/gpio/x86-gpio.h | 36 ++++
6 files changed, 295 insertions(+), 29 deletions(-)
create mode 100644 doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt
create mode 100644 include/dt-bindings/gpio/x86-gpio.h
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index c73e421..ea10963 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -6,6 +6,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/x86-gpio.h>
+
/include/ "skeleton.dtsi"
/include/ "serial.dtsi"
@@ -21,6 +23,25 @@
silent_console = <0>;
};
+ pch_pinctrl {
+ compatible = "intel,x86-pinctrl";
+ pin_usb_host_en0@0 {
+ gpio-offset = <0x80 8>;
+ pad-offset = <0x260>;
+ mode-gpio;
+ output-value = <1>;
+ direction = <PIN_OUTPUT>;
+ };
+
+ pin_usb_host_en1@0 {
+ gpio-offset = <0x80 9>;
+ pad-offset = <0x258>;
+ mode-gpio;
+ output-value = <1>;
+ direction = <PIN_OUTPUT>;
+ };
+ };
+
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
diff --git a/arch/x86/include/asm/arch-baytrail/gpio.h
b/arch/x86/include/asm/arch-baytrail/gpio.h
index 4e8987c..85a65a8 100644
--- a/arch/x86/include/asm/arch-baytrail/gpio.h
+++ b/arch/x86/include/asm/arch-baytrail/gpio.h
@@ -9,5 +9,6 @@
/* Where in config space is the register that points to the GPIO registers? */
#define PCI_CFG_GPIOBASE 0x48
+#define PCI_CFG_IOBASE 0x4c
#endif /* _X86_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
index 1099427..ed85b08 100644
--- a/arch/x86/include/asm/gpio.h
+++ b/arch/x86/include/asm/gpio.h
@@ -147,6 +147,7 @@ struct pch_gpio_map {
} set3;
};
+int gpio_ich6_pinctrl_init(void);
void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio);
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
diff --git a/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt
b/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt
new file mode 100644
index 0000000..45ab1af
--- /dev/null
+++ b/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt
@@ -0,0 +1,31 @@
+Intel x86 PINCTRL/GPIO controller
+
+Pin-muxing on x86 can be described with a node for the PINCTRL master
+node and a set of child nodes for each pin on the SoC.
+
+The PINCTRL master node requires the following properties:
+- compatible : "intel,x86-pinctrl"
+
+Pin nodes must be children of the pinctrl master node and can
+contain the following properties:
+- pad-offset - (required) offset in the IOBASE for the pin to
configured.
+- gpio-offset - (required) offset in the GPIOBASE for the pin to
configured and
+ also the bit shift in this register.
+- mode-gpio - (optional) standalone property to force the
pin into GPIO mode.
+- mode-func - (optional) function number to assign to the
pin. if 'mode-gpio'
+ is set, this property will be ignored.
+in case of 'mode-gpio' property set:
+- output-value - (optional) this set the default output value of the
GPIO.
+- direction - (optional) this set the direction of the gpio.
+- pull-str - (optional) this set the pull strength of the pin.
+- pull-assign - (optional) this set the pull assignement (up/down) of
the pin.
+
+Example:
+
+pin_usb_host_en0@0 {
+ gpio-offset = <0x80 8>;
+ pad-offset = <0x260>;
+ mode-gpio;
+ output-value = <1>;
+ direction = <PIN_OUTPUT>;
+};
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index 7e679a0..c18c60f 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -44,21 +44,28 @@ struct ich6_bank_priv {
uint16_t lvl;
};
+#define GPIO_USESEL_OFFSET(x) (x)
+#define GPIO_IOSEL_OFFSET(x) (x + 4)
+#define GPIO_LVL_OFFSET(x) (x + 8)
+
+#define IOPAD_MODE_MASK 0x7
+#define IOPAD_PULL_ASSIGN_SHIFT 7
+#define IOPAD_PULL_ASSIGN_MASK (0x3 << IOPAD_PULL_ASSIGN_SHIFT)
+#define IOPAD_PULL_STRENGTH_SHIFT 9
+#define IOPAD_PULL_STRENGTH_MASK (0x3 << IOPAD_PULL_STRENGTH_SHIFT)
+
/* TODO: Move this to device tree, or platform data */
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
{
gd->arch.gpio_map = map;
}
-static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
+static int gpio_ich6_get_base(unsigned long base)
{
- struct ich6_bank_platdata *plat = dev_get_platdata(dev);
pci_dev_t pci_dev; /* handle for 0:1f:0 */
u8 tmpbyte;
u16 tmpword;
u32 tmplong;
- u16 gpiobase;
- int offset;
/* Where should it be? */
pci_dev = PCI_BDF(0, 0x1f, 0);
@@ -123,9 +130,9 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
* while on the Ivybridge the bit0 is used to indicate it is an
* I/O space.
*/
- tmplong = x86_pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
+ tmplong = x86_pci_read_config32(pci_dev, base);
if (tmplong == 0x00000000 || tmplong == 0xffffffff) {
- debug("%s: unexpected GPIOBASE value\n", __func__);
+ debug("%s: unexpected BASE value\n", __func__);
return -ENODEV;
}
@@ -135,7 +142,195 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice
*dev)
* at the offset that we just read. Bit 0 indicates that it's
* an I/O address, not a memory address, so mask that off.
*/
- gpiobase = tmplong & 0xfffe;
+ return tmplong & 0xfffc;
+}
+
+static int _ich6_gpio_set_value(uint16_t base, unsigned offset, int value)
+{
+ u32 tmplong;
+ tmplong = inl(base);
+ if (value)
+ tmplong |= (1UL << offset);
+ else
+ tmplong &= ~(1UL << offset);
+ outl(tmplong, base);
+
+ return 0;
+}
+
+static int _ich6_gpio_set_function(uint16_t base, unsigned offset, int func)
+{
+ u32 tmplong;
+
+ if (func) {
+ tmplong = inl(base);
+ tmplong |= (1UL << offset);
+ outl(tmplong, base);
+ } else {
+ tmplong = inl(base);
+ tmplong &= ~(1UL << offset);
+ outl(tmplong, base);
+ }
+
+ return 0;
+}
+
+static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir)
+{
+ u32 tmplong;
+
+ if (!dir) {
+ tmplong = inl(base);
+ tmplong |= (1UL << offset);
+ outl(tmplong, base);
+ } else {
+ tmplong = inl(base);
+ tmplong &= ~(1UL << offset);
+ outl(tmplong, base);
+ }
+
+ return 0;
+}
+
+static int _gpio_ich6_pinctrl_cfg_pin(u32 gpiobase, u32 iobase, int pin_node)
+{
+ u32 gpio_offset[2] = { -1, -1 };
+ u32 pad_offset;
+ int tmplong;
+ const void *tmpnode;
+
+ /*
+ * GPIO node is not mandatory, so we only do the
+ * pinmuxing if the node exist.
+ */
+ fdtdec_get_int_array(gd->fdt_blob, pin_node, "gpio-offset",
+ gpio_offset, 2);
+ if (gpio_offset[0] != -1) {
+ /* Do we want to force the GPIO mode? */
+ tmpnode = fdt_getprop(gd->fdt_blob, pin_node, "mode-gpio",
+ NULL);
+ if (tmpnode)
+ _ich6_gpio_set_function(GPIO_USESEL_OFFSET
+ (gpiobase) +
+ gpio_offset[0],
+ gpio_offset[1], 1);
+
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "direction", -1);
+ if (tmplong != -1)
+ _ich6_gpio_set_direction(GPIO_IOSEL_OFFSET
+ (gpiobase) +
+ gpio_offset[0],
+ gpio_offset[1], tmplong);
+
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "output-value", -1);
+ if (tmplong != -1)
+ _ich6_gpio_set_value(GPIO_LVL_OFFSET(gpiobase)
+ + gpio_offset[0],
+ gpio_offset[1], tmplong);
+ }
+#ifdef PCI_CFG_IOBASE
+ /*
+ * The offset for the same pin for the IOBASE and GPIOBASE are
+ * different, so instead of maintaining a lookup table,
+ * the device tree should provide directly the correct
+ * value for both mapping.
+ */
+ pad_offset = fdtdec_get_int(gd->fdt_blob, pin_node, "pad-offset", -1);
+ if (pad_offset == -1) {
+ debug("%s: Invalid register io offset %d\n",
+ __func__, pad_offset);
+ return -EINVAL;
+ }
+
+ /*
+ * Do we need to set a specific function mode?
+ * If someone put also 'mode-gpio', this option will
+ * be just ignored by the controller
+ */
+ tmplong = fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1);
+ if (tmplong != -1)
+ clrsetbits_le32(iobase + pad_offset, IOPAD_MODE_MASK, tmplong);
+
+ /* Configure the pull-up/down if needed */
+ tmplong = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1);
+ if (tmplong != -1)
+ clrsetbits_le32(iobase + pad_offset,
+ IOPAD_PULL_ASSIGN_MASK,
+ tmplong << IOPAD_PULL_ASSIGN_SHIFT);
+
+ tmplong = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength", -1);
+ if (tmplong != -1)
+ clrsetbits_le32(iobase + pad_offset,
+ IOPAD_PULL_STRENGTH_MASK,
+ tmplong << IOPAD_PULL_STRENGTH_SHIFT);
+
+ debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset,
+ readl(iobase + pad_offset));
+#endif
+
+ return 0;
+}
+
+int gpio_ich6_pinctrl_init(void)
+{
+ int pin_node;
+ int node;
+ int ret;
+ u32 gpiobase;
+ u32 iobase;
+
+#ifdef PCI_CFG_IOBASE
+ /*
+ * Get the memory/io base address to configure every pins.
+ * IOBASE is used to configure the mode/pads
+ * GPIOBASE is used to configure the direction and default value
+ */
+ iobase = gpio_ich6_get_base(PCI_CFG_IOBASE);
+ if (iobase < 0) {
+ debug("%s: invalid IOBASE address (%08x)\n", __func__, iobase);
+ return -EINVAL;
+ }
+#endif
+
+ gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
+ if (gpiobase < 0) {
+ debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
+ gpiobase);
+ return -EINVAL;
+ }
+
+ /* This is not an error to not have a pinctrl node */
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+ "intel,x86-pinctrl");
+ if (node < 0) {
+ debug("%s: no pinctrl node\n", __func__);
+ return 0;
+ }
+
+ for (pin_node = fdt_first_subnode(gd->fdt_blob, node);
+ pin_node > 0;
+ pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) {
+ /* Configure the pin */
+ ret = _gpio_ich6_pinctrl_cfg_pin(gpiobase, iobase, pin_node);
+ if (ret != 0) {
+ debug("%s: invalid configuration for the pin %d\n",
+ __func__, pin_node);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ich6_bank_platdata *plat = dev_get_platdata(dev);
+ u16 gpiobase;
+ int offset;
+
+ gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
if (offset == -1) {
debug("%s: Invalid register offset %d\n", __func__, offset);
@@ -192,30 +387,19 @@ static int ich6_gpio_request(struct udevice *dev,
unsigned offset,
static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
- u32 tmplong;
- tmplong = inl(bank->io_sel);
- tmplong |= (1UL << offset);
- outl(bank->io_sel, tmplong);
- return 0;
+ return _ich6_gpio_set_direction(inl(bank->io_sel), offset, 0);
}
static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
- u32 tmplong;
- gpio_set_value(offset, value);
-
- tmplong = inl(bank->io_sel);
- tmplong &= ~(1UL << offset);
- outl(bank->io_sel, tmplong);
- return 0;
+ return _ich6_gpio_set_direction(inl(bank->io_sel), offset, 1);
}
static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
-
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
@@ -230,15 +414,7 @@ static int ich6_gpio_set_value(struct udevice *dev,
unsigned offset,
int value)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
- u32 tmplong;
-
- tmplong = inl(bank->lvl);
- if (value)
- tmplong |= (1UL << offset);
- else
- tmplong &= ~(1UL << offset);
- outl(bank->lvl, tmplong);
- return 0;
+ return _ich6_gpio_set_value(bank->lvl, offset, value);
}
static int ich6_gpio_get_function(struct udevice *dev, unsigned offset)
diff --git a/include/dt-bindings/gpio/x86-gpio.h
b/include/dt-bindings/gpio/x86-gpio.h
new file mode 100644
index 0000000..103bd04
--- /dev/null
+++ b/include/dt-bindings/gpio/x86-gpio.h
@@ -0,0 +1,36 @@
+/*
+ * This header provides constants for binding nvidia,tegra*-gpio.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_X86_GPIO_H
+#define _DT_BINDINGS_GPIO_X86_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define GPIO_MODE_NATIVE 0
+#define GPIO_MODE_GPIO 1
+
+#define GPIO_MODE_FUNC0 0
+#define GPIO_MODE_FUNC1 1
+#define GPIO_MODE_FUNC2 2
+#define GPIO_MODE_FUNC3 3
+#define GPIO_MODE_FUNC4 4
+#define GPIO_MODE_FUNC5 5
+#define GPIO_MODE_FUNC6 6
+
+#define PIN_INPUT 0
+#define PIN_OUTPUT 1
+
+#define PIN_INPUT_NOPULL 0
+#define PIN_INPUT_PULLUP 1
+#define PIN_INPUT_PULLDOWN 2
+
+#define PULL_STR_2K 0
+#define PULL_STR_20K 2
+
+#endif
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
