Move generic miscellaneous options that are standard across most, if not all, mx6 boards to central mx6_common define to ensure consistent features.
Signed-off-by: Peter Robinson <[email protected]> --- include/configs/aristainetos.h | 16 +--------------- include/configs/cgtqmx6eval.h | 20 +------------------- include/configs/cm_fx6.h | 6 ------ include/configs/embestmx6boards.h | 13 +------------ include/configs/gw_ventana.h | 16 ---------------- include/configs/hummingboard.h | 20 +------------------- include/configs/mx6_common.h | 16 ++++++++++++++++ include/configs/mx6cuboxi.h | 17 ----------------- include/configs/mx6qarm2.h | 22 +--------------------- include/configs/mx6sabre_common.h | 17 +---------------- include/configs/mx6slevk.h | 21 +-------------------- include/configs/mx6sxsabresd.h | 20 -------------------- include/configs/nitrogen6x.h | 20 +------------------- include/configs/novena.h | 12 ------------ include/configs/ot1200.h | 21 +-------------------- include/configs/platinum.h | 17 ----------------- include/configs/secomx6quq7.h | 21 +-------------------- include/configs/tbs2910.h | 13 ------------- include/configs/titanium.h | 19 ------------------- include/configs/tqma6.h | 17 ----------------- include/configs/udoo.h | 21 +-------------------- include/configs/wandboard.h | 21 +-------------------- include/configs/warp.h | 18 +----------------- 23 files changed, 29 insertions(+), 375 deletions(-) diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h index a18e707..dc2aa95 100644 --- a/include/configs/aristainetos.h +++ b/include/configs/aristainetos.h @@ -69,16 +69,11 @@ #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 /* Command definition */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_SETEXPR -#undef CONFIG_CMD_IMLS #define CONFIG_EXTRA_ENV_SETTINGS \ "script=u-boot.scr\0" \ @@ -187,22 +182,15 @@ #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ @@ -218,9 +206,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (12 * 1024) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 0d33305..352b821 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -42,14 +42,6 @@ /* Miscellaneous commands */ #define CONFIG_CMD_BMODE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -106,23 +98,15 @@ "else echo ERR: Fail to boot from mmc; fi" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "CGT-QMX6-Quad U-Boot > " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_CMDLINE_EDITING - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -137,9 +121,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 0b1252f..f5dd89c 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -28,7 +28,6 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_XIMG #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS /* MMC */ #define CONFIG_MMC @@ -61,14 +60,10 @@ /* Shell */ #define CONFIG_SYS_PROMPT "CM-FX6 # " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) /* SPI flash */ -#define CONFIG_SYS_NO_FLASH #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 @@ -76,7 +71,6 @@ #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) /* Environment */ -#define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 6862577..a9c702c 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -84,28 +84,19 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ #undef CONFIG_CMD_FPGA #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR -#undef CONFIG_CMD_IMLS #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 @@ -126,9 +117,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #if defined(CONFIG_ENV_IS_IN_MMC) diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 9e83b4f..4424083 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -140,7 +140,6 @@ #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -219,23 +218,12 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -/* serial console (ttymxc1,115200) */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "Ventana > " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_HWCONFIG /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Memory configuration */ #define CONFIG_SYS_MEMTEST_START 0x10000000 @@ -254,9 +242,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH /* no NOR flash */ - /* * MTD Command for mtdparts */ @@ -273,7 +258,6 @@ #endif /* Persistent Environment Config */ -#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ #ifdef CONFIG_SPI_FLASH #define CONFIG_ENV_IS_IN_SPI_FLASH #else diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h index b15a250..b21b45e 100644 --- a/include/configs/hummingboard.h +++ b/include/configs/hummingboard.h @@ -23,13 +23,7 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_I2C #define CONFIG_CMD_BMODE @@ -160,16 +154,6 @@ "fi; " \ "else run netboot; fi" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -183,9 +167,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 6fb6969..08ae39c 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -53,6 +53,22 @@ #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_BOOTDELAY 3 +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* GPIO */ #define CONFIG_MXC_GPIO diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 36cb581..4455f02 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -49,13 +49,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_NO_FLASH - /* Command definition */ #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_SETEXPR @@ -165,16 +158,6 @@ "fi; " \ "else run netboot; fi" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index ce736f7..720d430 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -42,14 +42,6 @@ #define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -127,19 +119,9 @@ #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 - -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_CMDLINE_EDITING - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -153,9 +135,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 0d3ff7b..ae12223 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -66,16 +66,10 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_SETEXPR -#undef CONFIG_CMD_IMLS #ifdef CONFIG_SUPPORT_EMMC_BOOT #define EMMC_ENV \ @@ -188,19 +182,12 @@ #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ @@ -216,9 +203,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 6566608..2cced5d 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -60,14 +60,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_SMSC -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -143,18 +135,9 @@ "else run netboot; fi" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 - -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M) -#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ @@ -171,9 +154,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE SZ_8K #if defined CONFIG_SYS_BOOT_SPINOR diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 4c8c6e2..a2f03d6 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -26,14 +26,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -109,18 +101,9 @@ "else run netboot; fi" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 1024 - -#define CONFIG_SYS_MAXARGS 256 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ @@ -211,9 +194,6 @@ #define CONFIG_MXC_OCOTP #endif -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - #define CONFIG_CMD_TIME #define CONFIG_FSL_QSPI diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 2ada53b..e618194 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -139,14 +139,6 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_PREBOOT "" #ifdef CONFIG_CMD_SATA @@ -303,20 +295,12 @@ #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "U-Boot > " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 48 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_CMDLINE_EDITING - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -330,9 +314,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #if defined(CONFIG_SABRELITE) diff --git a/include/configs/novena.h b/include/configs/novena.h index ca1856c..d75ccc8 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -18,7 +18,6 @@ #define CONFIG_FIT #define CONFIG_KEYBOARD #define CONFIG_OF_LIBFDT -#define CONFIG_SYS_NO_FLASH #include "mx6_common.h" @@ -47,18 +46,9 @@ #define CONFIG_VIDEO /* U-Boot general configurations */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ -#define CONFIG_AUTO_COMPLETE /* Command auto complete */ -#define CONFIG_CMDLINE_EDITING /* Command history etc */ -#define CONFIG_SYS_HUSH_PARSER /* U-Boot environment */ -#define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_SIZE (16 * 1024) /* * Environment is on MMC, starting at offset 512KiB from start of the card. @@ -180,8 +170,6 @@ /* UART */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_CONS_INDEX 1 /* USB Configs */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 356a9f5..f3c5205 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -133,27 +133,10 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_PREBOOT "" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_CBSIZE 1024 - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 @@ -168,9 +151,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */ #define CONFIG_ENV_OFFSET (1024 * 1024) diff --git a/include/configs/platinum.h b/include/configs/platinum.h index fae94e1..c9ad448 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -27,7 +27,6 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_FUSE #define CONFIG_CMD_I2C -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_MII #define CONFIG_CMD_MMC #define CONFIG_CMD_MTDPARTS @@ -47,8 +46,6 @@ /* UART config */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_CONS_INDEX 1 /* I2C config */ #define CONFIG_SYS_I2C @@ -100,8 +97,6 @@ #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) /* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - #ifdef CONFIG_CMD_NAND /* NAND config */ @@ -148,9 +143,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - /* Device tree support */ #define CONFIG_OF_LIBFDT @@ -161,20 +153,11 @@ #define CONFIG_BOOTCOMMAND "run bootubi_scr" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_PREBOOT -#define CONFIG_SYS_CBSIZE 256 - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* MTD/UBI/UBIFS config */ #define CONFIG_LZO diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h index 17787a1..d34064f 100644 --- a/include/configs/secomx6quq7.h +++ b/include/configs/secomx6quq7.h @@ -21,14 +21,7 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR @@ -94,24 +87,14 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING - - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -126,9 +109,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #if defined(CONFIG_ENV_IS_IN_MMC) diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 7bbfb7b..34e12eb 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -18,13 +18,7 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "Matrix U-Boot> " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_HZ 1000 @@ -51,17 +45,13 @@ /* Serial console */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */ -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_CONSOLE_MUX -#define CONFIG_CONS_INDEX 1 /* *** Command definition *** */ #include <config_cmd_default.h> -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR #define CONFIG_CMD_MEMTEST @@ -199,14 +189,11 @@ #endif /* Flash and environment organization */ -#define CONFIG_SYS_NO_FLASH - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 2 #define CONFIG_SYS_MMC_ENV_PART 1 #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_OFFSET (384 * 1024) -#define CONFIG_ENV_OVERWRITE #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ diff --git a/include/configs/titanium.h b/include/configs/titanium.h index 0bdf309..7bc5471 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -76,14 +76,6 @@ /* Miscellaneous commands */ #define CONFIG_CMD_BMODE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20)) @@ -162,20 +154,12 @@ #define CONFIG_BOOTCOMMAND "run nand_ubifs" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "Titanium > " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ -#define CONFIG_SYS_CBSIZE 256 - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 @@ -191,9 +175,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - /* Enable NAND support */ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 47443eb..8372d0d 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -124,17 +124,11 @@ #define CONFIG_TFTP_BLOCKSIZE 4096 #define CONFIG_NFS_READ_SIZE 4096 -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_ITEST #define CONFIG_CMD_SETEXPR -#undef CONFIG_CMD_IMLS /* place code in last 4 MiB of RAM */ #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) @@ -388,20 +382,12 @@ TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 512 - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128u * SZ_1K) /* Physical Memory Map */ @@ -417,9 +403,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP #define CONFIG_FIT diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 3f7c609..478754d 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -50,14 +50,7 @@ #define CONFIG_PHY_MICREL #define CONFIG_PHY_MICREL_KSZ9031 -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR @@ -167,18 +160,8 @@ "fi; " \ "else run netboot; fi" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 @@ -193,9 +176,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 7268af5..87b9930 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -23,14 +23,7 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* Command definition */ -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR @@ -224,16 +217,6 @@ "fi; " \ "else run netboot; fi" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -247,9 +230,7 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - +/* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/warp.h b/include/configs/warp.h index a406bd4..684a7c4 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -41,35 +41,19 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - /* Command definition */ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 - /* Watchdog */ #define CONFIG_HW_WATCHDOG #define CONFIG_IMX_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */ -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* Miscellaneous configurable options */ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M) -#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ -- 2.4.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
