Some A33 based boards use odt, while others do not, so make odt_en configurable for sun8i too by moving the existing Kconfig option for it out of the #if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I block it was in.
Signed-off-by: Hans de Goede <[email protected]> --- Changes in v2: -Use existing DRAM_ODT_EN Kconfig block moving it out of the #if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I block it was in --- arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c | 2 +- arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c | 3 +-- board/sunxi/Kconfig | 15 ++++++++------- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c index 3d7964d..9cb42d5 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c @@ -31,7 +31,7 @@ static const struct dram_para dram_para = { .clock = CONFIG_DRAM_CLK, .type = 3, .zq = CONFIG_DRAM_ZQ, - .odt_en = 1, + .odt_en = CONFIG_DRAM_ODT_EN, .para1 = 0, /* not used (only used when tpr13 bit 31 is set */ .para2 = 0, /* not used (only used when tpr13 bit 31 is set */ .mr0 = 6736, diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c index 979bb3c..a7a0a2e 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c @@ -19,7 +19,6 @@ #define DRAM_CLK_MUL 2 #define DRAM_CLK_DIV 4 #define DRAM_SIGMA_DELTA_ENABLE 1 -#define DRAM_ODT_EN 0 struct dram_para { u8 cs1; @@ -215,7 +214,7 @@ static int mctl_channel_init(struct dram_para *para) clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0); /* Set ODT */ - if ((CONFIG_DRAM_CLK > 400) && DRAM_ODT_EN) { + if ((CONFIG_DRAM_CLK > 400) && CONFIG_DRAM_ODT_EN) { setbits_le32(DXnGCR0(0), 0x3 << 9); setbits_le32(DXnGCR0(1), 0x3 << 9); } else { diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 940b6c7..e0c832b 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -95,6 +95,14 @@ config DRAM_ZQ ---help--- Set the dram zq value. +config DRAM_ODT_EN + int "sunxi dram odt_en value" + default 0 if !MACH_SUN8I_A23 + default 1 if MACH_SUN8I_A23 + ---help--- + Set the dram controller odt_en parameter. This can be used to + enable/disable the ODT feature. + if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I config DRAM_EMR1 int "sunxi dram emr1 value" @@ -103,13 +111,6 @@ config DRAM_EMR1 ---help--- Set the dram controller emr1 value. -config DRAM_ODT_EN - int "sunxi dram odt_en value" - default 0 - ---help--- - Set the dram controller odt_en parameter. This can be used to - enable/disable the ODT feature. - config DRAM_TPR3 hex "sunxi dram tpr3 value" default 0 -- 2.4.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
