Use Temperature grade info in OTP/eFUSE for thermal management and display of
thermal data.
Cc: Stefan Roese <s...@denx.de>
Cc: Eric Nelson <eric.nel...@boundarydevices.com>
Cc: Heiko Schocher <h...@denx.de>
Cc: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Jon Nettleton <jon.nettle...@gmail.com>
Cc: Jason Liu <r64...@freescale.com>
Cc: Ye Li <b37...@freescale.com>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Christian Gmeiner <christian.gmei...@gmail.com>
Cc: Markus Niebel <markus.nie...@tq-group.com>
Cc: Peng Fan <b51...@freescale.com>
Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
v3:
- include display of temperature grade for IMX6SX
v2:
- split into two series: 1 for CPU frequency, other for Temperature grade
Tim Harvey (4):
mx6: add OTP bank1 registers
imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from
OTP
imx: mx6: add display of CPU temperature grade in print_cpuinfo()
thermal: imx_thermal: use CPU temperature grade for trip points
arch/arm/cpu/armv7/mx6/soc.c | 38 +++++++++++++++++++++++++++++++
arch/arm/imx-common/cpu.c | 25 ++++++++++++++++----
arch/arm/include/asm/arch-mx6/imx-regs.h | 19 ++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 1 +
drivers/thermal/imx_thermal.c | 29 +++++++++++++++--------
include/imx_thermal.h | 6 +++++
6 files changed, 104 insertions(+), 14 deletions(-)
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
