If the EEPROM could not be read or is corrupt we always want to hang. Note that an error message will have been displayed by read_eeprom in this case.
Signed-off-by: Tim Harvey <[email protected]> --- board/gateworks/gw_ventana/gw_ventana_spl.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 9f5d2b1..d4418e5 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -515,10 +515,8 @@ void board_init_f(ulong dummy) setup_iomux_gpio(board_model, &ventana_info); /* provide some some default: 32bit 128MB */ - if (GW_UNKNOWN == board_model) { - ventana_info.sdram_width = 2; - ventana_info.sdram_size = 3; - } + if (GW_UNKNOWN == board_model) + hang(); /* configure MMDC for SDRAM width/size and per-model calibration */ spl_dram_init(8 << ventana_info.sdram_width, -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
