Hi Bin, On 25 May 2015 at 08:36, Bin Meng <[email protected]> wrote: > Although the two qemu-x86 targets (i440fx and q35) share a lot in > common, they still have something that cannot easily handled in one > place (like different configurations, different properties in the > device tree). Split to create two dedicated board configuration and > device tree files and make the i440fx be the default build target. > > Signed-off-by: Bin Meng <[email protected]> > --- > > arch/x86/dts/Makefile | 3 +- > arch/x86/dts/qemu-x86_i440fx.dts | 34 +++++++++++++++ > arch/x86/dts/{qemu-x86.dts => qemu-x86_q35.dts} | 2 +- > board/coreboot/coreboot/Kconfig | 4 +- > board/emulation/qemu-x86/Kconfig | 19 +++++++-- > configs/qemu-x86_defconfig | 1 - > doc/README.x86 | 13 +++++- > include/configs/{qemu-x86.h => qemu-x86_i440fx.h} | 20 ++------- > include/configs/qemu-x86_q35.h | 52 > +++++++++++++++++++++++ > 9 files changed, 122 insertions(+), 26 deletions(-) > create mode 100644 arch/x86/dts/qemu-x86_i440fx.dts > rename arch/x86/dts/{qemu-x86.dts => qemu-x86_q35.dts} (95%) > rename include/configs/{qemu-x86.h => qemu-x86_i440fx.h} (78%) > create mode 100644 include/configs/qemu-x86_q35.h
Do we need a separate config file? It would be good if all the changes were in the device tree so that we don't need a separate config. Or at least that the configs are the same except for the device tree. Regards, Simon _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
