>>>> This fix macb driver broken by commit >>>> 56b555a644f3cbb1b3929cb52b61d3ce483885f5 >>> what exactly broke ? drivers that are ported to NET_MULTI should *not* >>> be getting the mac from the environment. and from what i can see, the >>> macb driver is properly supporting the NET_MULTI setup. >>> >>> looks to me like the existing code is correct and your new proposed code >>> is not >> Hmm. Since pointed commit Ethernet just stopped to work, at least on my >> board similar to SAM9260EK. Maybe someone else can confirm it? >> >> Moreover, since that patch, when ethaddr is not set in the environment, >> and I set it from command line, I get this while trying to ping: >> >> U-Boot> ping 192.168.2.1 >> macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) >> *** ERROR: `ethaddr' not set >> macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) >> ping failed; host 192.168.2.1 is not alive > > do you have CONFIG_NET_MULTI defined ? if not, your board needs to switch > over to it. > -mike
I use configuration for at91sam9260ek board already present in U-Boot and CONFIG_NET_MULTI is defined there. Andrzej _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
