This patch enables building SPL without
CONFIG_SPL_SERIAL_SUPPORT support.
Signed-off-by: Heiko Schocher <[email protected]>
---
arch/arm/lib/interrupts.c | 4 ++--
arch/arm/mach-at91/arm926ejs/cpu.c | 2 +-
arch/arm/mach-at91/spl_at91.c | 3 +++
common/Makefile | 4 ++++
common/cli_readline.c | 2 +-
common/cli_simple.c | 2 +-
common/image.c | 8 ++++++--
common/spl/spl.c | 9 +++++++++
include/common.h | 7 +++++++
include/configs/apf27.h | 1 +
include/configs/mx31pdk.h | 1 +
include/configs/mxs.h | 1 +
include/configs/tx25.h | 1 +
lib/display_options.c | 4 ++--
14 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
index 06f4679..ec3fb77 100644
--- a/arch/arm/lib/interrupts.c
+++ b/arch/arm/lib/interrupts.c
@@ -123,8 +123,8 @@ void bad_mode (void)
void show_regs (struct pt_regs *regs)
{
- unsigned long flags;
- const char *processor_modes[] = {
+ unsigned long __maybe_unused flags;
+ const char __maybe_unused *processor_modes[] = {
"USER_26", "FIQ_26", "IRQ_26", "SVC_26",
"UK4_26", "UK5_26", "UK6_26", "UK7_26",
"UK8_26", "UK9_26", "UK10_26", "UK11_26",
diff --git a/arch/arm/mach-at91/arm926ejs/cpu.c
b/arch/arm/mach-at91/arm926ejs/cpu.c
index da1d359..990c689 100644
--- a/arch/arm/mach-at91/arm926ejs/cpu.c
+++ b/arch/arm/mach-at91/arm926ejs/cpu.c
@@ -42,7 +42,7 @@ void arch_preboot_os(void)
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
- char buf[32];
+ char __maybe_unused buf[32];
printf("CPU: %s\n", ATMEL_CPU_NAME);
printf("Crystal frequency: %8s MHz\n",
diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c
index a79a9dc..b19f95b 100644
--- a/arch/arm/mach-at91/spl_at91.c
+++ b/arch/arm/mach-at91/spl_at91.c
@@ -123,9 +123,12 @@ void board_init_f(ulong dummy)
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
#endif
+
+#if defined(CONFIG_SPL_SERIAL_SUPPORT)
/* init console */
at91_seriald_hw_init();
preloader_console_init();
+#endif
mem_init();
diff --git a/common/Makefile b/common/Makefile
index d6c1d48..516c299 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -250,7 +250,11 @@ obj-$(CONFIG_DDR_SPD) += ddr_spd.o
obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
obj-$(CONFIG_HWCONFIG) += hwconfig.o
obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_SERIAL_SUPPORT) += console.o
+else
obj-y += console.o
+endif
obj-$(CONFIG_CROS_EC) += cros_ec.o
obj-y += dlmalloc.o
ifdef CONFIG_SYS_MALLOC_F_LEN
diff --git a/common/cli_readline.c b/common/cli_readline.c
index 9a9fb35..c1476e4 100644
--- a/common/cli_readline.c
+++ b/common/cli_readline.c
@@ -597,7 +597,7 @@ int cli_readline_into_buffer(const char *const prompt, char
*buffer,
puts(tab_seq + (col & 07));
col += 8 - (col & 07);
} else {
- char buf[2];
+ char __maybe_unused buf[2];
/*
* Echo input using puts() to force an
diff --git a/common/cli_simple.c b/common/cli_simple.c
index 6c65cc6..00a8d2f 100644
--- a/common/cli_simple.c
+++ b/common/cli_simple.c
@@ -68,7 +68,7 @@ void cli_simple_process_macros(const char *input, char
*output)
/* 1 = waiting for '(' or '{' */
/* 2 = waiting for ')' or '}' */
/* 3 = waiting for ''' */
- char *output_start = output;
+ char __maybe_unused *output_start = output;
debug_parser("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n", strlen(input),
input);
diff --git a/common/image.c b/common/image.c
index f0f0135..eaa98d3 100644
--- a/common/image.c
+++ b/common/image.c
@@ -54,6 +54,10 @@ static const image_header_t *image_get_ramdisk(ulong
rd_addr, uint8_t arch,
#include <u-boot/md5.h>
#include <time.h>
#include <image.h>
+
+#ifndef __maybe_unused
+# define __maybe_unused /* unimplemented */
+#endif
#endif /* !USE_HOSTCC*/
#include <u-boot/crc.h>
@@ -274,7 +278,7 @@ void image_multi_getimg(const image_header_t *hdr, ulong
idx,
static void image_print_type(const image_header_t *hdr)
{
- const char *os, *arch, *type, *comp;
+ const char __maybe_unused *os, *arch, *type, *comp;
os = genimg_get_os_name(image_get_os(hdr));
arch = genimg_get_arch_name(image_get_arch(hdr));
@@ -299,7 +303,7 @@ static void image_print_type(const image_header_t *hdr)
void image_print_contents(const void *ptr)
{
const image_header_t *hdr = (const image_header_t *)ptr;
- const char *p;
+ const char __maybe_unused *p;
p = IMAGE_INDENT_STRING;
printf("%sImage Name: %.*s\n", p, IH_NMLEN, image_get_name(hdr));
diff --git a/common/spl/spl.c b/common/spl/spl.c
index aeb0645..7f5e37f 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -288,6 +288,14 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
jump_to_image_no_args(&spl_image);
}
+#if !defined(CONFIG_SPL_SERIAL_SUPPORT)
+/* we have no console ... so define some dummy functions ... */
+void preloader_console_init(void)
+{
+ gd->bd = &bdata;
+ gd->have_console = 0;
+}
+#else
/*
* This requires UART clocks to be enabled. In order for this to work the
* caller must ensure that the gd pointer is valid.
@@ -307,6 +315,7 @@ void preloader_console_init(void)
spl_display_print();
#endif
}
+#endif
/**
* spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution
diff --git a/include/common.h b/include/common.h
index 8f4b2ec..bafe120 100644
--- a/include/common.h
+++ b/include/common.h
@@ -830,11 +830,18 @@ int getc(void);
int tstc(void);
/* stdout */
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
+#define putc(...) do { } while (0)
+#define puts(...) do { } while (0)
+#define printf(...) do { } while (0)
+#define vprintf(...) do { } while (0)
+#else
void putc(const char c);
void puts(const char *s);
int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
int vprintf(const char *fmt, va_list args);
+#endif
/* stderr */
#define eputc(c) fputc(stderr, c)
diff --git a/include/configs/apf27.h b/include/configs/apf27.h
index 7554023..849eb1a 100644
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@@ -40,6 +40,7 @@
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
#define CONFIG_SPL_TEXT_BASE 0xA0000000
+#define CONFIG_SPL_SERIAL_SUPPORT
/* NAND boot config */
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 1282a6e..e01dfe6 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -35,6 +35,7 @@
#define CONFIG_SPL_MAX_SIZE 2048
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0x87dc0000
#define CONFIG_SYS_TEXT_BASE 0x87e00000
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 38b1e93..9d823de 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -55,6 +55,7 @@
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
/* Memory sizes */
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 622bd53..95fcdac 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -26,6 +26,7 @@
#define CONFIG_SPL_MAX_SIZE 2048
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0x810c0000
#define CONFIG_SYS_TEXT_BASE 0x81200000
diff --git a/lib/display_options.c b/lib/display_options.c
index 57fb974..6d9c6aa 100644
--- a/lib/display_options.c
+++ b/lib/display_options.c
@@ -121,9 +121,9 @@ int print_buffer(ulong addr, const void *data, uint width,
uint count,
} lb;
int i;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
- uint64_t x;
+ uint64_t __maybe_unsued x;
#else
- uint32_t x;
+ uint32_t __maybe_unused x;
#endif
if (linelen*width > MAX_LINE_LENGTH_BYTES)
--
2.1.0
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
