[root@pollux dfu-util]# ./src/dfu-util -l dfu-util 0.8 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to [email protected]
Found DFU: [0908:02d2] ver=0212, devnum=119, cfg=1, intf=0, alt=0, name="Linux", serial="UNKNOWN" [root@pollux dfu-util]# Signed-off-by: Heiko Schocher <[email protected]> --- board/siemens/smartweb/smartweb.c | 29 +++++++++++++++++++++++++++++ board/siemens/taurus/taurus.c | 27 +++++++++++++++++++++++++++ include/configs/smartweb.h | 34 ++++++++++++++++++++++++++++++---- include/configs/taurus.h | 28 +++++++++++++++++++++++++++- 4 files changed, 113 insertions(+), 5 deletions(-) diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index cf8a7f5..2d42488 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -25,6 +25,7 @@ #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_spi.h> #include <spi.h> +#include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <watchdog.h> #ifdef CONFIG_MACB @@ -108,6 +109,29 @@ static void smartweb_macb_hw_init(void) } #endif /* CONFIG_MACB */ +#ifdef CONFIG_USB_GADGET_AT91 +#include <linux/usb/at91_udc.h> + +void at91_udp_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + /* Enable PLLB */ + writel(get_pllb_init(), &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) + ; + + /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ + at91_periph_clk_enable(ATMEL_ID_UDP); + + writel(AT91SAM926x_PMC_UDP, &pmc->scer); +} + +struct at91_udc_data board_udc_data = { + .baseaddr = ATMEL_BASE_UDP0, +}; +#endif + int board_early_init_f(void) { /* enable this here, as we have SPL without serial support */ @@ -134,6 +158,11 @@ int board_init(void) at91_set_gpio_output(AT91_PIN_PC10, 0); at91_set_gpio_output(AT91_PIN_PC11, 1); +#ifdef CONFIG_USB_GADGET_AT91 + at91_udp_hw_init(); + at91_udc_probe(&board_udc_data); +#endif + return 0; } diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index d10411c..54f67da 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -272,6 +272,29 @@ void spi_cs_deactivate(struct spi_slave *slave) at91_set_gpio_value(TAURUS_SPI_CS_PIN, 1); } +#ifdef CONFIG_USB_GADGET_AT91 +#include <linux/usb/at91_udc.h> + +void at91_udp_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + /* Enable PLLB */ + writel(get_pllb_init(), &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) + ; + + /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ + at91_periph_clk_enable(ATMEL_ID_UDP); + + writel(AT91SAM926x_PMC_UDP, &pmc->scer); +} + +struct at91_udc_data board_udc_data = { + .baseaddr = ATMEL_BASE_UDP0, +}; +#endif + int board_init(void) { /* adress of boot parameters */ @@ -284,6 +307,10 @@ int board_init(void) taurus_macb_hw_init(); #endif at91_spi0_hw_init(TAURUS_SPI_MASK); +#ifdef CONFIG_USB_GADGET_AT91 + at91_udp_hw_init(); + at91_udc_probe(&board_udc_data); +#endif return 0; } diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 9f22139..baec73b 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -75,7 +75,7 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000) + ROUND(3 * CONFIG_ENV_SIZE + 4*1024*1024, 0x1000) /* NAND flash settings */ #define CONFIG_NAND_ATMEL @@ -140,15 +140,42 @@ #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ +#define CONFIG_CMD_USB #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 + +/* USB DFU support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_AT91 + +/* DFU class support */ +#define CONFIG_CMD_DFU +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_NAND +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) +#define DFU_MANIFEST_POLL_TIMEOUT 25000 + +/* USB DFU IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" + +#define CONFIG_SYS_CACHELINE_SIZE 0x2000 #endif /* General Boot Parameter */ @@ -195,7 +222,6 @@ #undef CONFIG_CMD_LOADS #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB #define CONFIG_CMD_FAT #ifdef CONFIG_MACB diff --git a/include/configs/taurus.h b/include/configs/taurus.h index dd35a8f..99cf302 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -128,12 +128,38 @@ /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE + +/* USB DFU support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_AT91 + +/* DFU class support */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_DFU +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_NAND +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) +#define DFU_MANIFEST_POLL_TIMEOUT 25000 + +/* USB DFU IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" + +#define CONFIG_SYS_CACHELINE_SIZE 0x2000 #endif /* SPI EEPROM */ @@ -251,7 +277,7 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) + ROUND(3 * CONFIG_ENV_SIZE + 4*1024*1024, 0x1000) /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -- 2.1.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
