Thanks Jagan. Rgds, Vikas
> -----Original Message----- > From: Jagan Teki [mailto:[email protected]] > Sent: Monday, June 15, 2015 12:31 PM > To: Vikas MANOCHA > Cc: [email protected]; [email protected]; [email protected]; > [email protected] > Subject: Re: [U-Boot] [PATCH 0/6] spi: cadence_qspi: optimize & fix indirect > read-writes > > On 16 June 2015 at 00:21, Vikas MANOCHA <[email protected]> wrote: > > Hello All, > > > > I just figured out that this patchset has dependency on another patchset > under review. I am not sure how to handle situations like this. > > I can think of following options, please let me know if anyone of these is > ok: > > > > - I send the next version of my previous patchset (under review) with > addition of this patchset. With it, all the patches will apply on master. > > - wait for the previous patchset to get in mainline....(might take some > time). > > Just create the patches on top of master[1] and add the subject-prefix as > PATCH RESEND. > Pls- try to work on master always for avoiding dependencies. > > [1] http://git.denx.de/?p=u-boot.git;a=summary > > > > > Rgds, > > Vikas > > > >> -----Original Message----- > >> From: Vikas MANOCHA > >> Sent: Monday, June 15, 2015 11:19 AM > >> To: [email protected]; [email protected]; > [email protected]; > >> [email protected] > >> Cc: Vikas MANOCHA > >> Subject: [PATCH 0/6] spi: cadence_qspi: optimize & fix indirect > >> read-writes > >> > >> This patchset: > >> - removes sram polling while reading/writing from flash. > >> - fixes trigger base & transfer start address register programming. > >> This fix superseeds the previous patch "spi: cadence_qspi: Fix the > >> indirect ahb trigger address setting" > >> - adds support to get fifo width from device tree > >> > >> Vikas Manocha (6): > >> spi: cadence_qspi: remove sram polling from flash read > >> spi: cadence_qspi: remove sram polling from flash write > >> spi: cadence_qspi: move trigger base configuration in init > >> spi: cadence_qspi: fix indirect read/write start address > >> spi: cadence_qspi: fix base trigger address & transfer start address > >> spi: cadence_qspi: get fifo width from device tree > >> > >> arch/arm/dts/socfpga.dtsi | 2 + > >> arch/arm/dts/stv0991.dts | 4 +- > >> drivers/spi/cadence_qspi.c | 14 +++-- > >> drivers/spi/cadence_qspi.h | 6 +- > >> drivers/spi/cadence_qspi_apb.c | 124 > >> +++++++++------------------------------- > >> 5 files changed, 43 insertions(+), 107 deletions(-) > > thanks! > -- > Jagan | Openedev. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
