Now that the device-model port of the musb mode makes it possible, enable both the ehci and oth in host mode on boards where the otg is wired up in host only mode, either via an usb-a receptacle or via an usb <-> sata converter.
Signed-off-by: Hans de Goede <hdego...@redhat.com> --- configs/CSQ_CS908_defconfig | 4 +++- configs/Mele_A1000G_quad_defconfig | 4 +++- configs/Mini-X_defconfig | 5 ++++- configs/ba10_tv_box_defconfig | 5 ++++- 4 files changed, 14 insertions(+), 4 deletions(-) diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 850d70d..f89e67c 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -6,7 +6,9 @@ CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index 3a746c8..3a2c155 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -16,9 +16,11 @@ CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 918b639..3ce3272 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -3,4 +3,7 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index f2ab415..111792f 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -6,4 +6,7 @@ CONFIG_DRAM_EMR1=4 CONFIG_USB2_VBUS_PIN="PH12" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC" +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB9" -- 2.4.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
