On 23 June 2015 at 19:45, Simon Glass <[email protected]> wrote: > On 22 June 2015 at 22:18, Bin Meng <[email protected]> wrote: >> So far interrupt routing works pretty well for any on-chip devices >> on Intel Crown Bay. When inserting any PCIe card to any PCIe slot, >> Linux kernel is smart enough to do interrupt swizzling and figure >> out device's irq using its parent bridge's interrupt routing info >> all the way up to its root port. In U-Boot all PCIe root ports' >> interrupts were routed to PIRQ E/F/G/H before, while actually all >> PCIe downstream ports received INTx are routed to PIRQ A/B/C/D >> directly and not configurable. Now we change this mapping so that >> any external PCIe device can work correctly. >> >> Signed-off-by: Bin Meng <[email protected]> >> >> --- >> >> Changes in v2: >> - New patch to change PCIe root ports' interrupt routing for queensbay >> >> arch/x86/cpu/queensbay/tnc.c | 13 +++++++------ >> arch/x86/dts/crownbay.dts | 20 ++++++++++++++++---- >> 2 files changed, 23 insertions(+), 10 deletions(-) > > Acked-by: Simon Glass <[email protected]>
Applied to u-boot-x86, thanks! _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
