> > diff --git a/board/gdsys/compactcenter/compactcenter.c
> > b/board/gdsys/compactcenter/compactcenter.c new file mode
> 100644 index
> > 0000000..9f1e49d
> > --- /dev/null
> > +++ b/board/gdsys/compactcenter/compactcenter.c
>
> <snip>
>
> > +#if defined(CONFIG_OF_LIBFDT) &&
> defined(CONFIG_OF_BOARD_SETUP) void
> > +ft_board_setup(void *blob, bd_t *bd) {
>
> Please check the latest version of this code in
> canyonlands.c. It's now using the 4xx common
> __ft_board_setup() function. Please move to this version as well.
This code in canyonlands.c does not work for me:
void ft_board_setup(void *blob, bd_t *bd)
{
u32 val[4];
int rc;
__ft_board_setup(blob, bd);
/* Fixup NOR mapping */
val[0] = CONFIG_SYS_NOR_CS; /* chip select number */
val[1] = 0; /* always 0 */
val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L; /* we fixed up
this address */
val[3] = gd->bd->bi_flashsize;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
__ft_board_setup() sets the property "ranges", with an entry for every
member of EBC_NUM_BANKS.
Then the so called "fixup" happens and the property "ranges" is set
again, this time with only one entry (for the nor flash). All other
entries are lost.
Cheers
Dirk
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
