Ping. Anyone review/apply this patch?

On Thu, Jun 25, 2015 at 10:32:26AM +0800, Peng Fan wrote:
>DCIMVAC is upgraded to DCCIMVAC for the individual processor
>(Cortex-A7) that the DCIMVAC is executed on.
>
>We should follow the linux dma follow. Before DMA read, first
>invalidate dcache then after DMA read, invalidate dcache again.
>
>With the DMA direction DMA_FROM_DEVICE, the dcache need be
>invalidated again after the DMA completion. The reason is
>that we need explicity make sure the dcache been invalidated
>thus to get the DMA'ed memory correctly from the physical memory.
>Any cache-line fill during the DMA operations such as the
>pre-fetching can cause the DMA coherency issue, thus CPU get the stale data.
>
>Signed-off-by: Peng Fan <[email protected]>
>Signed-off-by: Ye.Li <[email protected]>
>Signed-off-by: Nitin Garg <[email protected]>
>Signed-off-by: Jason Liu <[email protected]>
>---
> drivers/mmc/fsl_esdhc.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
>diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>index c4719e6..0510bf0 100644
>--- a/drivers/mmc/fsl_esdhc.c
>+++ b/drivers/mmc/fsl_esdhc.c
>@@ -341,6 +341,9 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 
>struct mmc_data *data)
>               err = esdhc_setup_data(mmc, data);
>               if(err)
>                       return err;
>+
>+              if (data->flags & MMC_DATA_READ)
>+                      check_and_invalidate_dcache_range(cmd, data);
>       }
> 
>       /* Figure out the transfer arguments */
>@@ -437,6 +440,11 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 
>struct mmc_data *data)
>                       }
>               } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
> 
>+              /*
>+               * Need invalidate the dcache here again to avoid any
>+               * cache-fill during the DMA operations such as the
>+               * speculative pre-fetching etc.
>+               */
>               if (data->flags & MMC_DATA_READ)
>                       check_and_invalidate_dcache_range(cmd, data);
> #endif
>-- 
>1.8.4
>
>
>_______________________________________________
>U-Boot mailing list
>[email protected]
>http://lists.denx.de/mailman/listinfo/u-boot

Regards,
Peng.
-- 
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to