Hi,
On 10-07-15 17:31, Bin Liu wrote:
Hi,
On 07/10/2015 10:12 AM, Heiko Schocher wrote:
Hello Samuel,
Am 10.07.2015 um 16:50 schrieb Egli, Samuel:
Hi Hans,
-----Original Message----- From: Hans de Goede
[mailto:hdego...@redhat.com] Sent: Freitag, 10. Juli 2015 16:37
To: Egli, Samuel; ma...@denx.de Cc: u-boot@lists.denx.de;
tr...@konsulko.com; Bin Liu; Meier, Roger; Daniel Mack Subject:
Re: [U-Boot] [PATCH] musb: set MUSB speed based on CONFIG
Hi,
On 10-07-15 16:30, Hans de Goede wrote:
Hi,
On 10-07-15 15:16, Samuel Egli wrote:
From: Bin Liu <b-...@ti.com>
Do not config MUSB to highspeed mode if
CONFIG_USB_GADGET_DUALSPEED is not set, in which case Ether
gadget only operates in fullspeed.
Note: This patch is necessary for devices like some siemens
boards that allow only FULL SPEED USB 1.1, e.g. DFU
download.
Signed-off-by: Bin Liu <b-...@ti.com> Reviewed-by: Tom Rini
<tr...@konsulko.com> Tested-by: Samuel Egli
<samuel.e...@siemens.com> CC: Marek Vasut <ma...@denx.de> CC:
Heiko Schocher <h...@denx.de> CC: Daniel Mack
<zon...@gmail.com> CC: Roger Meier <r.me...@siemens.com>
Nack this breaks highspeed mode on boards which use the musb in
host mode, and thus do not set CONFIG_USB_GADGET_DUALSPEED.
My bad, I had a short thought about this when I was initially working on
this patch, but did not really think about it throughly. Thanks for
bring it up.
p.s.
Given that you want to use this as a hack to work around the
broken pcb design of your board I suggest adding a new option for
this
Well, lets not discuss the "broken" pcb design. It seems that
wiring protection is not that common. Unfortunately, such a
protection is too expensive for USB High speed :-(.
Agreed, we have seen many cases that have nothing to do with hardware
design, but MUSB has to work in full-speed mode.
titled: CONFIG_USB_MUSB_NO_HIGHSPEED and then do:
+#ifndef CONFIG_USB_MUSB_NO_HIGHSPEED | MUSB_POWER_HSENAB
+#endif
This would be good enough. The point is indeed to limit it to full
speed.
Using CONFIG_USB_GADGET_DUALSPEED for this seems wrong, since
this has nothing to do with enabling dualspeed mode for the
gadget code really.
I agree that the name is confusing.
Yes, I vote for Hans suggestion.
*Adding* a new macro CONFIG_USB_MUSB_NO_HIGHSPEED for musb driver causes
CONFIG_USB_GADGET_DUALSPEED redundant, because both control for full-speed.
I suggest to *rename* CONFIG_USB_GADGET_DUALSPEED to
CONFIG_USB_FULLSPEED_ONLY. So that we can use one macro for both gadget
and musb drivers. Considering supper-speed exists and future, I think
CONFIG_USB_NO_HIGHSPEED is confusing...
This works for me, as long as the submitter of this change ensures that
things do not regress for existing musb users, such as all sunxi boards,
which would have regressed with the original patch.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
