Hi Anton, On 15.07.2015 11:01, Anton Schubert wrote: > This patch initializes the SATA address windows on Armada XP and > allows it to work with the existing mvsata_ide driver. > It also adds the necessary configuration for the db-mv784mp-gp board.
But it doesn't enable the IDE interface and commands. I would prefer to enable CONFIG_CMD_IDE by default for this board. Please add this to v2 of this patch. I tested this on the db-mv784mp-gp board and get this output: Marvell>> ide info IDE device 0: Model: TS8GHSD310 Firm: 20120518 Ser#: 20121206A51815115288 Type: Hard Disk Capacity: 7627.9 MB = 7.4 GB (15621984 x 512) IDE device 1: Model: TS8GHSD310 Firm: 20120518 Ser#: 20121206A51815115288 Type: Hard Disk Capacity: 7627.9 MB = 7.4 GB (15621984 x 512) So this 8GiB device is listed twice (I'm not even sure where its connected - I've never used IDE on it and no external disk is connected). Could you please comment on this? Thanks, Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot