Hi,
On 22-07-15 10:45, Paul Kocialkowski wrote:
The USB_KEYBOARD Kconfig is not specific to sunxi, so we can move it to the
common USB Kconfig.
Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
---
board/sunxi/Kconfig | 5 -----
drivers/usb/Kconfig | 6 ++++++
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 9c25d49..66d2c4e 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -531,13 +531,8 @@ config VIDEO_LCD_TL059WV5C0
endchoice
-
config USB_KEYBOARD
- boolean "Enable USB keyboard support"
default y
- ---help---
- Say Y here to add support for using a USB keyboard (typically used
- in combination with a graphical console).
config GMAC_TX_DELAY
int "GMAC Transmit Clock Delay Chain"
This leaves with just:
config USB_KEYBOARD
default y
And we've just gone to a whole bunch of removals of Kconfig
code like this because it breaks "make savedefconfig" when
used with non sunxi boards (in this case).
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index d602e44..ab2a6a1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -66,4 +66,10 @@ config USB_STORAGE
Say Y here if you want to connect USB mass storage devices to your
board's USB port.
+config USB_KEYBOARD
+ boolean "Enable USB keyboard support"
+ ---help---
+ Say Y here to add support for using a USB keyboard (typically used
+ in combination with a graphical console).
+
endif
So we need to set the default here, how about we add a
CONFIG_USB_HAS_HCD hidden bool option, and then select that from
CONFIG_USB_EHCI, CONFIG_USB_MUSB_HOST, etc, and then here do:
default y if CONFIG_USB_HAS_HCD
?
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
