This is kind of microseries-within-series indent cleanup. This patch just tweaks the indentation so it is visible what is supposed to go where.
It is likely that this patch has checkpatch warnings, but for the sake of not breaking the code, these are ignored. No functional change. Signed-off-by: Marek Vasut <[email protected]> --- drivers/ddr/altera/sequencer.c | 56 ++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 29 deletions(-) diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index 32713a8..2f2b88b 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -2243,8 +2243,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, write_group, d); } - for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX && grp_calibrated == 0; - p++) { + for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX && grp_calibrated == 0; p++) { /* set a particular dqdqs phase */ scc_mgr_set_dqdqs_output_phase_all_ranks(read_group, p); @@ -2257,10 +2256,9 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, * using current DQDQS phase. */ rw_mgr_mem_calibrate_read_load_patterns(0, 1); - if (!(gbl->phy_debug_mode_flags & - PHY_DEBUG_DISABLE_GUARANTEED_READ)) { + if (!(gbl->phy_debug_mode_flags & PHY_DEBUG_DISABLE_GUARANTEED_READ)) { if (!rw_mgr_mem_calibrate_read_test_patterns_all_ranks - (read_group, 1, &bit_chk)) { + (read_group, 1, &bit_chk)) { debug_cond(DLEVEL == 1, "%s:%d Guaranteed read test failed:", __func__, __LINE__); debug_cond(DLEVEL == 1, " g=%u p=%u d=%u\n", @@ -2269,37 +2267,37 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, } } -/* case:56390 */ + /* case:56390 */ grp_calibrated = 1; - if (rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay - (write_group, read_group, test_bgn)) { - /* - * USER Read per-bit deskew can be done on a - * per shadow register basis. - */ - for (rank_bgn = 0, sr = 0; - rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS; - rank_bgn += NUM_RANKS_PER_SHADOW_REG, - ++sr) { + if (rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay + (write_group, read_group, test_bgn)) { /* - * Determine if this set of ranks - * should be skipped entirely. + * USER Read per-bit deskew can be done on a + * per shadow register basis. */ - if (!param->skip_shadow_regs[sr]) { + for (rank_bgn = 0, sr = 0; + rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS; + rank_bgn += NUM_RANKS_PER_SHADOW_REG, + ++sr) { /* - * If doing read after write - * calibration, do not update - * FOM, now - do it then. + * Determine if this set of ranks + * should be skipped entirely. */ - if (!rw_mgr_mem_calibrate_vfifo_center - (rank_bgn, write_group, - read_group, test_bgn, 1, 0)) { - grp_calibrated = 0; - failed_substage = - CAL_SUBSTAGE_VFIFO_CENTER; + if (!param->skip_shadow_regs[sr]) { + /* + * If doing read after write + * calibration, do not update + * FOM, now - do it then. + */ + if (!rw_mgr_mem_calibrate_vfifo_center + (rank_bgn, write_group, + read_group, test_bgn, + 1, 0)) { + grp_calibrated = 0; + failed_substage = CAL_SUBSTAGE_VFIFO_CENTER; + } } } - } } else { grp_calibrated = 0; failed_substage = CAL_SUBSTAGE_DQS_EN_PHASE; -- 2.1.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
