Wrap dtaps_per_ptap into the sdr_working_phase() function to trim down the number of params. It's a constant too.
Signed-off-by: Marek Vasut <[email protected]> --- drivers/ddr/altera/sequencer.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index 75a0699..d93b5fe 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -1378,11 +1378,12 @@ static int sdr_find_phase(int working, const u32 grp, u32 *v, u32 *work, return -EINVAL; } -static int sdr_working_phase(uint32_t grp, - uint32_t dtaps_per_ptap, uint32_t *work_bgn, - uint32_t *v, uint32_t *d, uint32_t *p, - uint32_t *i) +static int sdr_working_phase(uint32_t grp, uint32_t *work_bgn, + uint32_t *v, uint32_t *d, uint32_t *p, + uint32_t *i) { + const u32 dtaps_per_ptap = IO_DELAY_PER_OPA_TAP / + IO_DELAY_PER_DQS_EN_DCHAIN_TAP; int ret; *work_bgn = 0; @@ -1565,7 +1566,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp) /* ******************************************************** */ /* * step 2: find first working phase, increment in ptaps * */ work_bgn = 0; - if (sdr_working_phase(grp, dtaps_per_ptap, &work_bgn, &v, &d, &p, &i)) + if (sdr_working_phase(grp, &work_bgn, &v, &d, &p, &i)) return 0; work_end = work_bgn; -- 2.1.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
