Signed-off-by: Vignesh R <vigne...@ti.com>
---
 arch/arm/include/asm/ti-common/ti-edma3.h |  2 +
 drivers/dma/ti-edma3.c                    | 78 +++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)

diff --git a/arch/arm/include/asm/ti-common/ti-edma3.h 
b/arch/arm/include/asm/ti-common/ti-edma3.h
index 5adc1dac0e65..6a7a321c1bdf 100644
--- a/arch/arm/include/asm/ti-common/ti-edma3.h
+++ b/arch/arm/include/asm/ti-common/ti-edma3.h
@@ -117,5 +117,7 @@ void edma3_set_src_addr(u32 base, int slot, u32 src);
 void edma3_set_transfer_params(u32 base, int slot, int acnt,
                               int bcnt, int ccnt, u16 bcnt_rld,
                               enum edma3_sync_dimension sync_mode);
+void edma3_transfer(unsigned long edma3_base_addr, unsigned int
+               edma_slot_num, void *dst, void *src, size_t len);
 
 #endif
diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
index 8184ded9fa81..d6a427f2e21d 100644
--- a/drivers/dma/ti-edma3.c
+++ b/drivers/dma/ti-edma3.c
@@ -382,3 +382,81 @@ void qedma3_stop(u32 base, struct edma3_channel_config 
*cfg)
        /* Clear the channel map */
        __raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum));
 }
+
+void edma3_transfer(unsigned long edma3_base_addr, unsigned int
+                   edma_slot_num, void *dst, void *src, size_t len)
+{
+       struct edma3_slot_config        slot;
+       struct edma3_channel_config     edma_channel;
+       int                             b_cnt_value = 1;
+       int                             rem_bytes  = 0;
+       int                             a_cnt_value = len;
+       unsigned int                    addr = (unsigned int) (dst);
+       unsigned int                    max_acnt  = 0x7FFFU;
+
+       if (len > max_acnt) {
+               b_cnt_value = (len / max_acnt);
+               rem_bytes  = (len % max_acnt);
+               a_cnt_value = max_acnt;
+       }
+
+       slot.opt        = 0;
+       slot.src        = ((unsigned int) src);
+       slot.acnt       = a_cnt_value;
+       slot.bcnt       = b_cnt_value;
+       slot.ccnt       = 1;
+       slot.src_bidx   = a_cnt_value;
+       slot.dst_bidx   = a_cnt_value;
+       slot.src_cidx   = 0;
+       slot.dst_cidx   = 0;
+       slot.link       = EDMA3_PARSET_NULL_LINK;
+       slot.bcntrld    = 0;
+       slot.opt        = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
+                         EDMA3_SLOPT_COMP_CODE(0) |
+                         EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
+
+       edma3_slot_configure(edma3_base_addr, edma_slot_num, &slot);
+       edma_channel.slot = edma_slot_num;
+       edma_channel.chnum = 0;
+       edma_channel.complete_code = 0;
+        /* set event trigger to dst update */
+       edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
+
+       qedma3_start(edma3_base_addr, &edma_channel);
+       edma3_set_dest_addr(edma3_base_addr, edma_channel.slot, addr);
+
+       while (edma3_check_for_transfer(edma3_base_addr, &edma_channel))
+               ;
+       qedma3_stop(edma3_base_addr, &edma_channel);
+
+       if (rem_bytes != 0) {
+               slot.opt        = 0;
+               slot.src        =
+                       (b_cnt_value * max_acnt) + ((unsigned int) src);
+               slot.acnt       = rem_bytes;
+               slot.bcnt       = 1;
+               slot.ccnt       = 1;
+               slot.src_bidx   = rem_bytes;
+               slot.dst_bidx   = rem_bytes;
+               slot.src_cidx   = 0;
+               slot.dst_cidx   = 0;
+               slot.link       = EDMA3_PARSET_NULL_LINK;
+               slot.bcntrld    = 0;
+               slot.opt        = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
+                                 EDMA3_SLOPT_COMP_CODE(0) |
+                                 EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
+               edma3_slot_configure(edma3_base_addr, edma_slot_num, &slot);
+               edma_channel.slot = edma_slot_num;
+               edma_channel.chnum = 0;
+               edma_channel.complete_code = 0;
+               /* set event trigger to dst update */
+               edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
+
+               qedma3_start(edma3_base_addr, &edma_channel);
+               edma3_set_dest_addr(edma3_base_addr, edma_channel.slot, addr +
+                                   (max_acnt * b_cnt_value));
+               while (edma3_check_for_transfer(edma3_base_addr, &edma_channel))
+                       ;
+               qedma3_stop(edma3_base_addr, &edma_channel);
+       }
+}
-- 
2.5.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to